ecm
-
- Regular Member
- Posts: 152
- Joined: April 10th, 2006, 11:22 pm
- Location: Springfield IL
- Contact:
Im pretty sure it DOES matter because most 95's are odb 2 computers which ARE different compaired to the 94's. 93 and earlier run different maps allthough it may still work it may not run very well. But im no expert on computers here, but I also did just order a new computer off ebay for my 94 so I hope I have the right one also .
Apexi Safc 2 ,Timex Boost-Temp-Oil Gauges, Stage 1 Performance clutch, 8.5 mm Magnacore plug Wires,2.5 inch exhaust, Cold Air Intake , Short Shifter , High temp rotors & Ceramic pads to slow it all down !
- Tunes67
- Supporting Member
- Posts: 4708
- Joined: January 27th, 2005, 6:36 pm
- Location: Everett, WA
- Contact:
Incorrect. Only a handful of 95's were OBDII. Most were OBDI. 96+ are all OBDII. So as long as the car is a 94 or 95.. the 95 ECU should work just fine. 92's & 93's are different because the engine were different.. 92-93 had the SOHC B6ME engine as compared to the 94+ DOHC B6DE engines.Im pretty sure it DOES matter because most 95's are odb 2 computers which ARE different compaired to the 94's.
Tunes67
"So long.. and thanks for all the fish!" "Momma says VW Bugs are the devil" "This one time at band camp.. I stuck a flute in my Throttle Body"
"Screw you guys.. I am goin home"
I am the Cranky God of Mods!!! Tremble before my fury!! LOL
"Screw you guys.. I am goin home"
I am the Cranky God of Mods!!! Tremble before my fury!! LOL
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
i don't know if any 95's in the states are obdII as far as i know all 94/95's where obdI but had some properties of obdII they were kind of a transition
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
-
- Regular Member
- Posts: 152
- Joined: April 10th, 2006, 11:22 pm
- Location: Springfield IL
- Contact:
I can tell you that ODB 1 runs a 8 MHZ crystal and ODB 2 run's a 4 MHZ. Not sure what function that plays in the Production of Map's, Timing Ect. Im sure there's no big difference between all 94 + mx's, besides the process of checking for codes. As Tunes67 stated, all 94 and later are all B6DE engines. Good Luck !
Apexi Safc 2 ,Timex Boost-Temp-Oil Gauges, Stage 1 Performance clutch, 8.5 mm Magnacore plug Wires,2.5 inch exhaust, Cold Air Intake , Short Shifter , High temp rotors & Ceramic pads to slow it all down !