distributer ka34 coil removal

zydawn · Post by **zydawn** » October 15th, 2006, 1:20 am

my dizzy died on me last week and I had a spare so I got the car on the road again quickly but I am trying to convert my old ka34 dizzy to hei.
I have completly removed to coil which is a solid unit and has the 3 pin connector mounted to it but how do I disable the coil?

there are no wire track or anything to cut

any help would be apreciated

max kl · Post by **max kl** » October 15th, 2006, 1:24 am

you must have a 94 n up mx3 its a diffrent dis.

zydawn · Post by **zydawn** » October 15th, 2006, 4:03 am

it is a 94 but in Australia so it may be different

max kl · Post by **max kl** » October 15th, 2006, 1:18 pm

i no that the 95 n up probe and mx6 use that distrubtor. you may wana check out
http://www.mx6.com/forums/index.php
http://www.supermotors.net/clubs/probetalk
and see if they can help.
i do no that you set up is diffrent and the normal hei swap wirring will differ for your car.