tranny problem!

crave93 · Post by **crave93** » October 9th, 2006, 1:34 pm

hey guy's gal's um i have a 1993 mx-3 precidia auto, every time i stop hard or quick the tanny feels like it jumps into neutral, and wont go anywhere when i press on the gas. so i have to move the shifter up and down for a wile then it will go into gear again, and the shifter is stil in drive when it jumps out. any help plz??

Tunes67 · Post by **Tunes67** » October 9th, 2006, 1:47 pm

Check and fill your tranny fluid.

Tunes67

crave93 · Post by **crave93** » October 9th, 2006, 1:57 pm

checked it its all still good

Tunes67 · Post by **Tunes67** » October 9th, 2006, 3:37 pm

Either the shifter cable needs to be adjusted or its in the process of breaking. You can adjust it.. I believe there are instructions in the online shop manual on how to adjust the cable. You may also need to replace your tranny filter.

Tunes67

crave93 · Post by **crave93** » October 9th, 2006, 6:22 pm

wheres the online shop manual?

Aston Wards · Post by **Aston Wards** » October 9th, 2006, 9:43 pm

wheres the online shop manual?

Back at MX-3.com there's a link to the manual
http://www.mx-3.com/index.cfm

PatMX3 · Post by **PatMX3** » November 6th, 2006, 3:40 pm

My GS AT shifter in DRIVE gear only works in between the DRIVE gear and 2ND. A budd says it may be the LINKAGE?? What might i have to do to get the right gear to its proper postion?.

Tunes67 · Post by **Tunes67** » November 6th, 2006, 3:51 pm

There is no "Linkage" There is a shifter cable that leads from the shifter to a bracket on the transmission itself. And yes it can be adjusted.

Tunes67

PatMX3 · Post by **PatMX3** » November 7th, 2006, 6:16 pm

ThanX a million$ Tunes67!

u rock lol