Suspension Techniques

Whitey · Post by **Whitey** » September 1st, 2006, 6:13 pm

I have a friend that used suspension techniques springs on his mx-6 but i have never been in the car, so i dont know how stiff they are. My question is, does anyone here use suspension techniques springs on their mx-3? How do you like/dislike them?

P.S. They are going to be paired up with KYB shocks. Any imput on them would be great too.

solo_ryder · Post by **solo_ryder** » September 2nd, 2006, 12:17 am

Hey I had those on my old mx. I had em with tokico hp's. They were alright, fairly stiff but not that harsh, I guess I would recommend them.

Edit* BTW Here is a pic lowered :

Mazdaracer · Post by **Mazdaracer** » September 2nd, 2006, 1:36 pm

ST springs pretty much followed the same characteristics as Eibachs. They don't go very low (.75 - 1) and aren't very stiff.

solo_ryder · Post by **solo_ryder** » September 2nd, 2006, 4:45 pm

Acctually they are listed as a 1.3" drop and mine settled at about 1.5", they are not the stiffest things, but they work if you just want to drop the car abit

wagZE · Post by **wagZE** » September 19th, 2006, 1:23 pm

I have st's on my mx-3. I miss my h&r's they were just that much better.

Post by **Custommx3** » September 19th, 2006, 2:23 pm

I have them on my RS. Ive had them on there almost 7-8 years now. I Like them.

Mine were originally a 1.75" drop, but have settled close to 2" over the years.

I dont think the newer ones are this much of a drop.