[updated] s1 designs butterfly mx3
-
- Regular Member
- Posts: 320
- Joined: November 17th, 2005, 2:34 pm
- Location: Edmonton, AB, Canada
[updated] s1 designs butterfly mx3
my latest design.
tell me wat u think
tell me wat u think
Last edited by s1zzl3 on January 12th, 2007, 12:06 am, edited 1 time in total.
- skillz_mx3
- Regular Member
- Posts: 52
- Joined: July 7th, 2006, 7:47 pm
- Location: Cambridge,Ontario,Canada
CRAZY!!
That is crazy!!..You got some major skillz!! Keep it up.. I LOVE IT
SKILLZZ -MX3
94' Teal Mazda MX3 Precidia GS V6..NEEDS A TRANNY(auto) 240,000kms
95' Mazda mx3 precidia 4 CYL -117,000kms
94' Teal Mazda MX3 Precidia GS V6..NEEDS A TRANNY(auto) 240,000kms
95' Mazda mx3 precidia 4 CYL -117,000kms
- GregoryChristian
- Supporting Member
- Posts: 1413
- Joined: March 4th, 2003, 2:01 am
- Location: Gulf Coast
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
can you do a reverse lambo style door for me? instead of it opening upwards towards the front i want it to open upwards towards the back
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
-
- Regular Member
- Posts: 231
- Joined: August 6th, 2006, 3:52 pm
- Location: Brantford, Ontario, Canada
looks sick, I like it a lot
95 RS Blaze Red, RTX 17's Gunmetal with Polished Lip, Falken Tires, GS Lip, Carbon Fibre Altezza Tailights, Black and Red Interior (front/rear seats, door panels, and rear panels. GS Spoiler, Hood with scoop, Black Mirrors, Pioneer Deh-p6800 Deck, Infinity 6010cs components, infintity 4x6 Rears, Red Shift Boot , 12 Blue Interior Lights throughout car and 4 leds in vents wired to 2 switches total
Feedback
http://www.mx-3.com/phpbb2/viewtopic.php?t=54606
http://www.cardomain.com/ride/2394622
Feedback
http://www.mx-3.com/phpbb2/viewtopic.php?t=54606
http://www.cardomain.com/ride/2394622
-
- Regular Member
- Posts: 320
- Joined: November 17th, 2005, 2:34 pm
- Location: Edmonton, AB, Canada
lol thanks guys,
im photoshoping another angle
so u guys can get a good idea of the concept design
the only trouble ive been having with the design is the colour
i cant think of the right colour..
if u guys have any ideas throw some out
i liked the reverse lambo door idea but extremely hard to do
because i want it to look as real as possible
n i have never seen these 'suicide lambo' doors
ill c wat i can do
i appreciate the ideas and the comments!
thanks again.
im photoshoping another angle
so u guys can get a good idea of the concept design
the only trouble ive been having with the design is the colour
i cant think of the right colour..
if u guys have any ideas throw some out
i liked the reverse lambo door idea but extremely hard to do
because i want it to look as real as possible
n i have never seen these 'suicide lambo' doors
ill c wat i can do
i appreciate the ideas and the comments!
thanks again.
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
Nice drawing but dont like it, I liked your other ones though (the RX7s)
It just reminds me of a 350ZX too much
Your convertible look waaaay different then the MX3
You should do some more MX3 drawings but ones that still have the Sports Coupe/HatchBack type of look. Not the Suppercar/Corvette look
I like the hips idea though
Hips are always a good idea as long as it flows with the car
Ford is even going to put some hips on the 08 Stang
It just reminds me of a 350ZX too much
Your convertible look waaaay different then the MX3
You should do some more MX3 drawings but ones that still have the Sports Coupe/HatchBack type of look. Not the Suppercar/Corvette look
I like the hips idea though
Hips are always a good idea as long as it flows with the car
Ford is even going to put some hips on the 08 Stang
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
i have actually be thinking about doing the butterfly doors but i can't figure out if it is possible or not... i love the design ... would love to see it on a regular mx-3 though
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
-
- Regular Member
- Posts: 320
- Joined: November 17th, 2005, 2:34 pm
- Location: Edmonton, AB, Canada
yeh thnks
i do have alot of photoshops where the car is made to look like an exotic machine
thats just my style
but i will try to be more flexible in my designs
most of these drawings will go into my portfolio
i will post a link to my Cardomain page
where u can see my mx3 as well as all the designs for my portfolio
be sure to check it out
i do have alot of photoshops where the car is made to look like an exotic machine
thats just my style
but i will try to be more flexible in my designs
most of these drawings will go into my portfolio
i will post a link to my Cardomain page
where u can see my mx3 as well as all the designs for my portfolio
be sure to check it out
-
- Regular Member
- Posts: 30
- Joined: August 23rd, 2005, 1:19 pm
- Contact:
-
- Regular Member
- Posts: 320
- Joined: November 17th, 2005, 2:34 pm
- Location: Edmonton, AB, Canada
not a bad idea,
if i can get a couple of high res pics of clean mx-3s
i'd be able to create photoshops alot more efficiently
instead of looking allover the internet for a decent pic of an mx-3
so if anyone wants to send me any pics it would be very helpfull
i will create a thread so u guys can post pics of ur rides..
rides your willing to see photoshoped and probably end up in my portfolio
thnks
if i can get a couple of high res pics of clean mx-3s
i'd be able to create photoshops alot more efficiently
instead of looking allover the internet for a decent pic of an mx-3
so if anyone wants to send me any pics it would be very helpfull
i will create a thread so u guys can post pics of ur rides..
rides your willing to see photoshoped and probably end up in my portfolio
thnks