Flywheel
-
- Regular Member
- Posts: 675
- Joined: September 15th, 2004, 2:01 am
Flywheel
Will the sohc flywheel fit the bp?
-
- Regular Member
- Posts: 121
- Joined: April 11th, 2005, 12:12 am
- Location: Grand Rapids, Michigan, USA
If you are still using the F-series transmission that came with the SOHC, then yes. If you upgrade to the G-series transmission that came with the BP, then you will need to use a flywheel made for that trans.
Last edited by Kuromu on July 8th, 2006, 12:10 am, edited 1 time in total.
93 MX3 RS BP 2.0 // 87 RX7 HKS Turbo
- Limegreen mx-3
- Regular Member
- Posts: 1778
- Joined: October 29th, 2002, 2:01 am
- Location: San Antonio TX
- Contact:
Yes as long as u use ur sohc f-series trany. look at my links
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.