engine noise *vid*
- relisys_3200
- Regular Member
- Posts: 875
- Joined: November 11th, 2004, 2:01 am
- Location: London / Ontario / Canada
- Contact:
engine noise *vid*
well, just though I'd throw this up. About 2 months ago, 2 days after I took it out of storage my car started making this noise. You can hear it coming from under the timing cover. I'm positive we have it narrowed down, but I just figured I would see what everyone thinks. We're going to do the timing belt, all the idlers, tensioner and water pump. So yeah....here it is
its kinda hard to tell, but you get the idea
click here
its kinda hard to tell, but you get the idea
click here
Brandon
1992 MX-3 GS-ZE
1992 MX-3 GS-ZE
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
Didn't you post this same vid a while back?
It deff sounds like a loose pulley or ideler. Timing change sounds like a good place to start.
It deff sounds like a loose pulley or ideler. Timing change sounds like a good place to start.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
yup sounds like a bad timing belt idler or whatever its called.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- relisys_3200
- Regular Member
- Posts: 875
- Joined: November 11th, 2004, 2:01 am
- Location: London / Ontario / Canada
- Contact:
- PWRD_BY_HKS
- Regular Member
- Posts: 696
- Joined: August 11th, 2004, 2:01 am
- Location: El Paso
how long did you have it in the storage hommie did you check ALL FLUIDS INCLUDING oil before running it maybe you had a minor oil leak and drained...... check your pulleys ........ that could also be the problem.....what were you doing before it made this noise .....dont lie where you racing?
jdmx-3 KID OF THE
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
That noise is awefully loud to be using a stethascope on it. You might blow a ear drum...
The socket and tubing is not as effective, but Barry is right it is a good way to locate where a noise is coming from more precisely.
The socket and tubing is not as effective, but Barry is right it is a good way to locate where a noise is coming from more precisely.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
that sounds like a camshaft noise to me pull that front cover and check out everything. i have heard a noise like that before and the car was blowing fuses.
did you prime the oil before u started the car? it take a few minutes for the oil to reach the lifters, be sure to have freash oil and good oil pressure. one of your oil galleries may be clogged.
did you prime the oil before u started the car? it take a few minutes for the oil to reach the lifters, be sure to have freash oil and good oil pressure. one of your oil galleries may be clogged.
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
nahy noit camshaft man.. i had the same noise before mjy timing belt change..it was the sprocket thingy..the tensioner yeah that
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!