1.6l sohc performance parts?

4-Cyl. Technical/Performance Discussions
Post Reply
mazdamx3sohc
Regular Member
Posts: 1088
Joined: April 8th, 2006, 9:21 am
Contact:

1.6l sohc performance parts?

Post by mazdamx3sohc »

is there cylinders, cams, intake/exhaust manifold, header backs or turbo(other then cork sport or mazdaspeed wherever it was i found it? any help would be appreciated.
User avatar
Limegreen mx-3
Regular Member
Posts: 1778
Joined: October 29th, 2002, 2:01 am
Location: San Antonio TX
Contact:

Post by Limegreen mx-3 »

racing mazda makes a turbo kit for the 1.6 sohc

http://www.racingmazda.com

they just made a 12.7 sec turbochaged bp on 8psi.
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
mazdamx3sohc
Regular Member
Posts: 1088
Joined: April 8th, 2006, 9:21 am
Contact:

Post by mazdamx3sohc »

i still really havent learned the motors is bp the escort gt protege one? know any cams? rockers, pisonts, rods, springs?
User avatar
Limegreen mx-3
Regular Member
Posts: 1778
Joined: October 29th, 2002, 2:01 am
Location: San Antonio TX
Contact:

Post by Limegreen mx-3 »

bp-de comes in the 90-94 mazda protege lx and escort gt for got which yrs.
as for these parts for the sohc good luck finding them not very much performance parts made for that motor better luck with swaping motors that b6-me sohc for the bp motor 1.8 dohc.
Last edited by Limegreen mx-3 on April 15th, 2006, 4:27 pm, edited 1 time in total.
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
User avatar
TREVO123
Regular Member
Posts: 654
Joined: November 29th, 2005, 8:57 pm
Location: BC, CANADA
Contact:

Post by TREVO123 »

Limegreen mx-3 wrote:bp-de comes in the 90-94 mazda protege and escort gt for got which yrs.
as for these parts for the sohc good luck finding them not very much performance parts made for that motor better luck with swaping motors that b6-me sohc for the bp motor 1.8 dohc.

I belive that is the b8-me
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
User avatar
Limegreen mx-3
Regular Member
Posts: 1778
Joined: October 29th, 2002, 2:01 am
Location: San Antonio TX
Contact:

Post by Limegreen mx-3 »

TREVO123 wrote:
Limegreen mx-3 wrote:bp-de comes in the 90-94 mazda protege and escort gt for got which yrs.
as for these parts for the sohc good luck finding them not very much performance parts made for that motor better luck with swaping motors that b6-me sohc for the bp motor 1.8 dohc.

I belive that is the b8-me
Consider that a 1.6 sohc (hence b6-me ) 6 meaning 1.6, me meaning sohc, b meaning mazda b-series engines.


the b8-me is found in 90-94 mazda protege se/dx models using the 1.8 sohc hence b for b-series engine, 8 for 1.8, and me for sohc

list of engines names for the different models b-series mazda made i believe this will corret ur misunderstanding. Trevo123



90-94 Mazda Protege SOHC 16v 1.8liter (B8-ME):
90-94 Mazda Protege DOHC 16v 1.8liter (BP-DE):
92-93 Mazda MX-3 SOHC 16v 1.6liter (B6-ME):
94-95 Mazda MX-3 DOHC 16v 1.6liter (B6-DE):
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
mazdamx3sohc
Regular Member
Posts: 1088
Joined: April 8th, 2006, 9:21 am
Contact:

Post by mazdamx3sohc »

i like chicken. eff it, im putting nos in my car and im gunna turbo it.
Post Reply

Return to “4-Cyl. Technical/Performance”