K8 nitrous

nathanMx-3 · Post by **nathanMx-3** » March 21st, 2006, 7:34 pm

what is the best nitrous kit/ shot to use on a K8 with aftermarket pistons , jet chip, HKS cam shafts (with stock fuel pump ,willing to switch)

Macpherson MX-3 · Post by **Macpherson MX-3** » March 23rd, 2006, 9:36 am

I know someone running a 50 shot, on stock engine and fuel pump, I recomend ZEX, they work well with stock engines. Whas that jet chip like on the K8?

Post by **Custommx3** » March 23rd, 2006, 9:54 am

HKS camshafts... HKS doesnt make cams for our cars.

nathanMx-3 · Post by **nathanMx-3** » March 23rd, 2006, 10:13 am

The guy i bouhgt the car from told me that he had coustom cam shafts put in that he got from HKS.

Post by **Custommx3** » March 23rd, 2006, 10:39 am

He lied.

Next time you take off your valve cover, take a picture and read the numbers on the cams. Probably k801.

Macpherson MX-3 · Post by **Macpherson MX-3** » March 23rd, 2006, 12:24 pm

I have been looking to find out if they do make cams for the mx3 did not find anything I thing he may have put in new cams in it but not HKS

Post by **Custommx3** » March 23rd, 2006, 12:56 pm

HKS doesnt even make a cam that would fit in a K series Block.

MAYBE he used KLZE cams, KL cams, or KF cams.

nathanMx-3 · Post by **nathanMx-3** » March 23rd, 2006, 1:07 pm

my friend and i, pulled the valve cover off and he told me that theydefinately arent HKS cams, but they are not stock,, anyway how much nitrous can the K8 handle

Post by **Custommx3** » March 23rd, 2006, 3:32 pm

Depends..

If your looking @ longevity.. not much.