Need help, which rims...
- BuGS
- Regular Member
- Posts: 1521
- Joined: May 5th, 2004, 2:01 am
- Location: East Wenatchee, WA, USA
- Contact:
Need help, which rims...
Ok should I get these ones:
OR these ones:
They both cost $109, both weight 13.5lbs, and both are 15X7. THe K1's (Silver) are 38mm offset, and the Pro Race Two (Bronze) are 35mm offset...
OR these ones:
They both cost $109, both weight 13.5lbs, and both are 15X7. THe K1's (Silver) are 38mm offset, and the Pro Race Two (Bronze) are 35mm offset...
- Tunes67
- Supporting Member
- Posts: 4708
- Joined: January 27th, 2005, 6:36 pm
- Location: Everett, WA
- Contact:
I like the design of the Pro Race ones.. not a huge fan of the bronze color though.. but good price.. light weight.. cant lose with either
Tunes67
Tunes67
"So long.. and thanks for all the fish!" "Momma says VW Bugs are the devil" "This one time at band camp.. I stuck a flute in my Throttle Body"
"Screw you guys.. I am goin home"
I am the Cranky God of Mods!!! Tremble before my fury!! LOL
"Screw you guys.. I am goin home"
I am the Cranky God of Mods!!! Tremble before my fury!! LOL
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
The K1 design is too common, but I have a set of knock-off Konig Toxxins. One of the most famous import wheels ever
I used to have a real set of Toxxins, but they started to look pretty rough after three owners and about 8 years of use.
I used to have a real set of Toxxins, but they started to look pretty rough after three owners and about 8 years of use.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
-
- Supporting Member
- Posts: 425
- Joined: June 2nd, 2002, 2:01 am
- Location: PA
Im a big fan of the k1s although i dont car tooo much about wieght and I'd do 16s...
93 GS-DE,mx6 tranny, obx 2nd gen headers, highflow cat n 2.25" catback, 65mm tb,CAI, mazdaspeed mounts, SPEC Stage I clutch kit, new K8 flywheel, SRD C.A.B., Intrax, S.T. braces
http://www.cardomain.com/memberpage/698108
http://www.cardomain.com/memberpage/698108
-
- Regular Member
- Posts: 248
- Joined: September 24th, 2003, 2:01 am
- Location: Corona, CA
- Contact:
Well, you know which ones i'll vote for
I hadn't seen the Pro Race till now, not digging the dimples on the spokes by the rim edge, but i do dig the 35mm offset, even if it's only a 3mm difference
Either one will be the mAd tYte yO
I hadn't seen the Pro Race till now, not digging the dimples on the spokes by the rim edge, but i do dig the 35mm offset, even if it's only a 3mm difference
Either one will be the mAd tYte yO
THINK FAST, GO RACING!!
2004 Mazda6 Wagon
2004 Mazda3 Sedan
1990 BG8P Protege LX - KLZE - Race Preped - #98 SM - SCCA Solo2
2004 Mazda6 Wagon
2004 Mazda3 Sedan
1990 BG8P Protege LX - KLZE - Race Preped - #98 SM - SCCA Solo2
-
- Regular Member
- Posts: 675
- Joined: September 15th, 2004, 2:01 am
with the color of your car I would go with the silver ones because they would stick out a bit better. But I love the 300zx, my wife just got one (I think I am in love...) Beat a mustage today with the Z! =)
1994 toyota supra single turbo
1994 Mazda MX-3 KL-ZE
If god owned a car... It would be a supra!!!
1994 Mazda MX-3 KL-ZE
If god owned a car... It would be a supra!!!