I just sent Taras an email so hopefully things will go smoothly and I can get my hands on this awesome opportunity!
Hey Ovendenk, Did Perry do the Floormats for you as well? if so, were they at an extra cost? if I'm going to spend this much money I'd like to hit everything at one shot and not have to worry about getting matching floormats as well. Thanks!
-Curt-
Possible GB: Seat Re-uphostery kits
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
ya, the floormats were an extra $100 plus $$$ for embroidery and it was only for the front mats because i already have good condition rear mats. perry's a great guy and is willing to go above and beyond what i would have expected in a business transaction that involves people that have never even seen each other.
if you're interested in extra things like i was or if you have specific needs for what you want, calling perry is your best bet. good luck man.
if you're interested in extra things like i was or if you have specific needs for what you want, calling perry is your best bet. good luck man.
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
So theres actually a chance that this is going through
Ovendenk the black in your kit isnt leather is it?
Ovendenk the black in your kit isnt leather is it?
1992 MX-3 V6 Z1 Arbet VIII 17 x 8" -35mm Proracing Springs on KYB Sports, Corksport Strutbars, Brembo Cross Drilled & Slotted, Goodridge SS Brakelines, Corksport SS Clutchline, Mazdaspeed Enginemounts & Front arm bushings, All SRD bushings in shifterlinkage and cross member, Pacesetter Shortshifter, KN Conefilter, Custom SS Exhaust, Stereo Oldschool Goodies Denon & Phoenix Gold, Boston Pro & Cerwin Vega and lots of other small goodies
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
no, vinyl. it feels and looks just like my buddy's leather interior though, so i can't complain.DJsMX-3 wrote:So theres actually a chance that this is going through
Ovendenk the black in your kit isnt leather is it?
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
sorry for the late response. i paid perry $1050 for black leather-like vinyl with red faux-suede inserts. also, as per the gb agreement, he gave me extra material to do the panel inserts as well.
on top of the gb stuff, i had perry make me some shifter and e-brake boots, floor mats, custom embroidery on the headrests and mats, and material for the headliner and cargo cover. all of which was obviously at an added cost and i'm sure perry could accomodate anyone else's requests if you get in contact with him.
once i get back from california and finish my two midterms next week, i'll finish what i can and post pics of everything. give me at least a week or so.
on top of the gb stuff, i had perry make me some shifter and e-brake boots, floor mats, custom embroidery on the headrests and mats, and material for the headliner and cargo cover. all of which was obviously at an added cost and i'm sure perry could accomodate anyone else's requests if you get in contact with him.
once i get back from california and finish my two midterms next week, i'll finish what i can and post pics of everything. give me at least a week or so.
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462