Car has crappy stereo install, can't find stock harness
-
Rotorhead87
- Junior Member
- Posts: 5
- Joined: September 23rd, 2005, 5:02 pm
Car has crappy stereo install, can't find stock harness
When I got this car, it had ultra cheap stereo with a crappy install job. I got a new stereo and went to install it, and I can't find the stock harness to connect up the new stereo. Where could it be? I looked all around behind the unit and don't see it tucked anywhere. Is there any way I could trace it from somewhere?
- Aston Wards
- Regular Member
- Posts: 761
- Joined: December 28th, 2001, 2:01 am
- Location: Christchurch, New Zealand
I'd guess the harness has ben cut off when the crappy stereo was installed, is your new stereo an OE unit? cos you could go to a wreckers an get a harness from (most) early 90's Mazdas, otherwise just wire it up from the bare wires, there are wiring diagrams on here, and probably in the online manual too
91 Eunos Presso KF-ZE
89 Nissan 300ZX TT 2+2
90 Nissan 300ZX TT 2+0

89 Nissan 300ZX TT 2+2
90 Nissan 300ZX TT 2+0

-
Rotorhead87
- Junior Member
- Posts: 5
- Joined: September 23rd, 2005, 5:02 pm
- TREVO123
- Regular Member
- Posts: 654
- Joined: November 29th, 2005, 8:57 pm
- Location: BC, CANADA
- Contact:
Make sure everything goes in nice.and post some pics when your finished with it
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811