new sway bar for the mx-3!!!

rmcg5 · Post by **rmcg5** » December 15th, 2005, 6:51 pm

I talked to the people over at zxtuner today about the swaybar... apparently the fittment is related to the bushings..... they are sending me a bar with a different set of bushings, that I am going to enlarge the diameter of to match the swaybar..... hopefully this will solve the problem...

jschrauwen · Post by **jschrauwen** » December 16th, 2005, 8:23 pm

rmcg5 wrote:I talked to the people over at zxtuner today about the swaybar... apparently the fittment is related to the bushings..... they are sending me a bar with a different set of bushings, that I am going to enlarge the diameter of to match the swaybar..... hopefully this will solve the problem...

Rob, I know myself a number of others would be quite interested in your progress and findings. A few pics if possible as to how the process went would also be good for us as well as anyone elses future endeavours. My new ZX bar is still in it's shipping box, un-opened until something gets resolved with this. Thanks,
*John*

rmcg5 · Post by **rmcg5** » December 17th, 2005, 12:21 am

I will get to this ASAP.... but I need to finish a motor swap first.... it should be done just after x-mas.... I will bore the bushings at work as soon as they come in....

jschrauwen · Post by **jschrauwen** » December 17th, 2005, 4:05 am

rmcg5 wrote:I will get to this ASAP.... but I need to finish a motor swap first.... it should be done just after x-mas.... I will bore the bushings at work as soon as they come in....

Hey good luck on the swap. And thanks for the future details on those bushings.

Legato626 · Post by **Legato626** » December 17th, 2005, 6:11 pm

Ya keep us posted.

happyclown · Post by **happyclown** » January 5th, 2006, 10:52 am

Have we lost another poor soul attempting to fit the bar

rmcg5 · Post by **rmcg5** » January 5th, 2006, 5:18 pm

I am not lost... but I also have not recieved the bar yet..... I haven't even been charged for it yet..... I will give them one more call before I give up....

jschrauwen · Post by **jschrauwen** » January 13th, 2006, 6:29 am

Any updates?? Is anyone successfull with the install of this yet?

rmcg5 · Post by **rmcg5** » January 13th, 2006, 8:53 pm

they don't seem to want to return my e-mails.....

mitmaks · Post by **mitmaks** » January 15th, 2006, 7:27 pm

i wouldnt mind ordering this one as long as it fits mx3, other option is to get whiteline bar

rmcg5 · Post by **rmcg5** » January 23rd, 2006, 7:21 pm

well we're back on I got in touch with rob over at zxtuner..... alegedly they are shipping the bar and bushings to my today.....

Gro Harlem · Post by **Gro Harlem** » January 23rd, 2006, 7:40 pm

sounds like a crock to me.

get on them if they continue this "pushing you back" BS. Sounds like they dont' want to solve the problem, they just want you to forget and get off their case.

hppwdn · Post by **hppwdn** » January 23rd, 2006, 11:50 pm

I was following this bar for awhile, gave up, ordered a whiteline bar, shipped on the slow boat from Australia, and it got here today. These ZXtuner guys seem pretty slow and no one who got the bar seems to have installed it.

mitmaks · Post by **mitmaks** » January 24th, 2006, 12:29 am

im still waiting to see if it fits then IM getting one

happyclown · Post by **happyclown** » January 25th, 2006, 8:13 am

theres 3 or 4 people who already have them, where'd they all go