[FS] Parting Out - 1994 Teal RS

Do you have an MX-3 related item for sale? Post a quick note here.
Post Reply
93_mx3_gs
Regular Member
Posts: 382
Joined: November 5th, 2005, 2:39 pm
Location: Salt Lake City, UT
Contact:

[FS] Parting Out - 1994 Teal RS

Post by 93_mx3_gs »

Hey guys, I just picked up a 1994 Teal RS MX-3 for 500.00 =) anyways, I took the motor out of it and the motor is like almost new, only 19,500 miles on it. So what I am going to do with this car is basically part it out. From top to bottom.

Engine has like a 36000 mile warranty and all paper work included with it.

The car over all has 90,000 miles on it. so if you guys need parts, hit me up.


Pic of the car.

Image

Image

Image

Image
Last edited by 93_mx3_gs on January 11th, 2006, 9:36 pm, edited 4 times in total.
User avatar
mx3_rider69
Regular Member
Posts: 97
Joined: May 25th, 2005, 1:48 pm

Post by mx3_rider69 »

how much for all the transmission parts im talkin about everything from ctluch assembly, cables lines,everyhting i wanna do an auto to manual trans i'm located in toronto,canada
93_mx3_gs
Regular Member
Posts: 382
Joined: November 5th, 2005, 2:39 pm
Location: Salt Lake City, UT
Contact:

Post by 93_mx3_gs »

$225.00 USD for all the parts. They will be heat washed and cleaned before shipping.
User avatar
mx3_rider69
Regular Member
Posts: 97
Joined: May 25th, 2005, 1:48 pm

Post by mx3_rider69 »

ok so preety much evrything i need for a manual swap right?
93_mx3_gs
Regular Member
Posts: 382
Joined: November 5th, 2005, 2:39 pm
Location: Salt Lake City, UT
Contact:

Post by 93_mx3_gs »

Yes.
User avatar
slimmyslim1420
Regular Member
Posts: 381
Joined: October 22nd, 2005, 12:22 pm
Location: Tennessee

Post by slimmyslim1420 »

pm sent.
1992 GS ZE swap 94 dash swap drilled and slotted rotors full ceramic pads CS SS clutch and brake lines KL-36 ecu zx-2 tokico struts eibach springs short shifter Tenzo exhaust Hi flow cat 2.5 in piping
93_mx3_gs
Regular Member
Posts: 382
Joined: November 5th, 2005, 2:39 pm
Location: Salt Lake City, UT
Contact:

Post by 93_mx3_gs »

More pics uptop.
projectmx
Senior Member
Posts: 2165
Joined: December 7th, 2002, 2:01 am
Location: windsor, ontario
Contact:

Post by projectmx »

how much for the glove box?
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
93_mx3_gs
Regular Member
Posts: 382
Joined: November 5th, 2005, 2:39 pm
Location: Salt Lake City, UT
Contact:

Post by 93_mx3_gs »

$1,000,000.000. USD :twisted:

PM sent.
Reaver19
Regular Member
Posts: 105
Joined: August 26th, 2005, 11:45 am
Location: Schuylkill Haven, PA

Post by Reaver19 »

Probably a dumb question...but does the passenger side halfshaft (including the intermediary shaft) from the 94' Mx-3 swap over to the 93' Mx-3? Is this one a manual or auto, and does it have anti-lock brakes or no? Thanks.
93' MX-3 - V6 (complete!) KLDE Engine, KL02 VAF, custom fog lights :)
93_mx3_gs
Regular Member
Posts: 382
Joined: November 5th, 2005, 2:39 pm
Location: Salt Lake City, UT
Contact:

Post by 93_mx3_gs »

Man you want that half shaft really bad don't you lol.

No idea as far as the swap but is a4cyl. manual, no abs. Don't know if it ever had it or not i'm not into keeping track of what year of what model had this and that other than MTX and V-6 XD
User avatar
psyense82
Regular Member
Posts: 465
Joined: January 31st, 2004, 2:01 am
Location: Lewiston, Maine

Post by psyense82 »

driver side front turn signal, housing and the harness that holds the bulb... with maybe.. oo... 1.5or so of the wire the harness is on.. mine was knocked out and the wire cut. and rear view mirror.....
Image
*note i will not be doing the rx7 hatch conversion, id rather get a BP*
LooseChangeRacing
Regular Member
Posts: 535
Joined: December 11th, 2003, 2:01 am
Location: Middletown PA

Post by LooseChangeRacing »

lol GS me and your deal is going through, so engine ecu and tranny are takin people....
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Reaver19
Regular Member
Posts: 105
Joined: August 26th, 2005, 11:45 am
Location: Schuylkill Haven, PA

Post by Reaver19 »

93_mx3_gs wrote:Man you want that half shaft really bad don't you lol.

No idea as far as the swap but is a4cyl. manual, no abs. Don't know if it ever had it or not i'm not into keeping track of what year of what model had this and that other than MTX and V-6 XD
Well, you spend a month and a half searching high and low for a part only to find out that it's not manufactured anymore, no local junkyards have one, and for the most part, nobody on the net has one heh. :wink:
Anyways My car is a 93' 1.8L manual without abs, yours is a 94' 1.6L manual without abs, so I think it might work, but I was wondering if any experts on here would know for sure heh. Maybe you could get some pics of it for me? :)
93' MX-3 - V6 (complete!) KLDE Engine, KL02 VAF, custom fog lights :)
93_mx3_gs
Regular Member
Posts: 382
Joined: November 5th, 2005, 2:39 pm
Location: Salt Lake City, UT
Contact:

Post by 93_mx3_gs »

is the half shaft a cv ? i've never heard of this half shaft thing before so tell me where it is and i'll grab it for you lol. -retarded.- :o
Post Reply

Return to “MX-3 Related Items For Sale/Trade”