Hi there,
I have been busy with school and didn't really open the system I bought until now. And I'm kinda stuck on how to install it.
Fist of all, it has a square connecter clip thing, 4 wires, Ground, +12V Remote out, ACC +12V and Back up 12V
Am I missing somthing?, Its the same ones on the screen as well, well it all has the video input and white and red audio ones and some other plugs for other things.
But I don't see anything that connects to speakers on the stock clips.
Am I suppose to connect it to something else? Or thats what it suppose to be like?
thanks
Car DVD player install help please
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Sorry, i didn't see you thread earlier, but a make and model would have helped for information on functionality and connectivity...but if you need help with your new one, don't be affraid to ask
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Complete custom job done by yours truely...well, I used desktop components and have upgraded all the parts (joy of using desktop parts) since I started the project 3 years ago...but because of the variety of parts available, nowadays, I just say;
Price of a computer you would like + 15" LCD + A/C inverter + cables = $$$
Most of my parts are over a year old, with the exception of the LCD and the 160GB hard drive I put in this year...so most i cannot get you prices, and I can't really remember, the video card is 2 years old. But considering, about $2000... the monitor was (Canadian prices) $700 with the custom trouchscreen overlay, payed $300 (got raped in brokerage fees) for the 250w DC-DC power supply cause the computer was too much for the inverter after doing some upgrades, the system became unstable, probably because of the power requirement. 160gb hard drive is worth what, $100, DVD/CD-RW drives are about $50. Lol, Athlon 2500+, Micro ATX motherboard and 2x256MB of DDR probably does for $100 on ebay as a combo. I picked up a Hercules Game Theater XP used for $80 which I haven't installed yet. the 800w A/C inverter at Canadian Tire is like $100 now. AIW 7500's are $60 on ebay with remote. So it all depends on what you want.
You can also get smaller pc's, build ones based off the ITX form factor, use shuttle PC's or cappuccino's. There are a few other carpc mx-3'ers...look into Barry's (Custommx-3) setup, he's using portable components...but that I can saw, I'm old scool and like upgradability.
Price of a computer you would like + 15" LCD + A/C inverter + cables = $$$
Most of my parts are over a year old, with the exception of the LCD and the 160GB hard drive I put in this year...so most i cannot get you prices, and I can't really remember, the video card is 2 years old. But considering, about $2000... the monitor was (Canadian prices) $700 with the custom trouchscreen overlay, payed $300 (got raped in brokerage fees) for the 250w DC-DC power supply cause the computer was too much for the inverter after doing some upgrades, the system became unstable, probably because of the power requirement. 160gb hard drive is worth what, $100, DVD/CD-RW drives are about $50. Lol, Athlon 2500+, Micro ATX motherboard and 2x256MB of DDR probably does for $100 on ebay as a combo. I picked up a Hercules Game Theater XP used for $80 which I haven't installed yet. the 800w A/C inverter at Canadian Tire is like $100 now. AIW 7500's are $60 on ebay with remote. So it all depends on what you want.
You can also get smaller pc's, build ones based off the ITX form factor, use shuttle PC's or cappuccino's. There are a few other carpc mx-3'ers...look into Barry's (Custommx-3) setup, he's using portable components...but that I can saw, I'm old scool and like upgradability.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
LOL, ya, cause it is, just modified into a car ![Smile :)](./images/smilies/icon_smile.gif)
But honnestly, 3.5 years ago, this market barely exist, and it was way cheaper to go this way...as compared to back then, it cost me less for the basic CarPC I built back then (just a Duron 750, 256MB RAM, 10gb hard drive using onboard video and sound) was, and it was the same speed but upgradable. The thing that hit me, the only LCD that would do VGA back then was the Xenarcs, which was over $1000 for a 7", while I got just a desktop 15" LCD for less $500. It made complete sence back then, but not necessary these days. But if you have any questions, PM me or post a thread...I've got this carpc stuff down to a science![Wink ;)](./images/smilies/icon_wink.gif)
![Smile :)](./images/smilies/icon_smile.gif)
But honnestly, 3.5 years ago, this market barely exist, and it was way cheaper to go this way...as compared to back then, it cost me less for the basic CarPC I built back then (just a Duron 750, 256MB RAM, 10gb hard drive using onboard video and sound) was, and it was the same speed but upgradable. The thing that hit me, the only LCD that would do VGA back then was the Xenarcs, which was over $1000 for a 7", while I got just a desktop 15" LCD for less $500. It made complete sence back then, but not necessary these days. But if you have any questions, PM me or post a thread...I've got this carpc stuff down to a science
![Wink ;)](./images/smilies/icon_wink.gif)
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project