hi all,
I've been reading the forums since I registered, but this is the first post
Here is the situation: lost control on wet road avoiding an SUV heading straight for my passenger side, spun, hit the curb hard with driver side, went over, drove away.
the place where I normally do repairs said that I've bent the rear driver side spindle and its a rare part; they couldn't find it quickly through their normal sources including junkyards, and since the car can be driven maybe I can find it myself. The car is out of alignment and I've been told there is no point to do it unless that part is replaced.
maybe someone could point me to a place online that could have this part. Ebay does not seem to have any.
mx-3 is my second car and the first that I feel is worth working on, apologies if I am not very technical.
its a 1993 1.6 with drums in the back
thanks.
rear spindle
- 2fazed
- Supporting Member
- Posts: 1885
- Joined: May 21st, 2002, 2:01 am
- Location: La Selva Beach, California
- Contact:
All you have to do is switch to disc brakes. All you do is replace the whole spindle, caliper, rotor, ebrake lines. It's really easy to do. And guess what? Any Protege from 90-94 will work. I know you'll be able to find those at the junkyards.
16 Hyundai Elantra Value Edition
06 Mazdaspeed6 2.3T
93 626 ES 2.5
92 Mx-3 RS 1.6
93 Mx-3 GS 2.5
93 Mx-3 RS 1.6
06 Mazdaspeed6 2.3T
93 626 ES 2.5
92 Mx-3 RS 1.6
93 Mx-3 GS 2.5
93 Mx-3 RS 1.6