neww mx-3 precidia
-
- Regular Member
- Posts: 320
- Joined: November 17th, 2005, 2:34 pm
- Location: Edmonton, AB, Canada
Jarago, heres ur request, i had to downsize the pics cuz i cant upload pics bigger then 250kb, but this is pretty much it, check it out. the front bumper went thru a massive reconstruction as u can c, i gave it more of an exotic feel in the final sketch. i jus started photoshopping tho so its not as neat. but btw thnxz
but remeber i started the revolution
but remeber i started the revolution
- bluebullet
- Regular Member
- Posts: 269
- Joined: January 13th, 2004, 2:01 am
- Location: Toronto
This whole post shows u started the revolution
those are pretty low quality, I'll fool around with them some, but email them to me at canadian.developer@gmail.com so I'll have better quality ones to work with
Thanks
those are pretty low quality, I'll fool around with them some, but email them to me at canadian.developer@gmail.com so I'll have better quality ones to work with
Thanks
Re: neww mx-3 precidia
Should photoshop the MX-3 round style headlights into the picture to see how they would look.s1zzl3 wrote:thought id jus post this pic up
its jus my idea of wat the new mx-3 should look like
i chopped up an rx8 n mx3 n pieced it together to make it
still not done but tell me wat u guys think so far
s1zzl.3..
Ever notice anyone driving slower than you is an idiot and anyone driving faster than you is a maniac?
01-03 Civic Projector Swap Tutorial
01-03 Civic Projector Swap Tutorial
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
iv got to say that looks bad a--. nice photo shop.
iv done a few pics. but actually this spring im helping a buddy do his MX exactly like that. we already have alot of the parts needed. now its just mostly me fiberglass work. he wanted to keep the MX rear tails but im trying to talk him into swapign thoes out too.
If Mazda got off of their buts and actually produced this car i think it would be a hit seller. and would probably do very well. provided they give it a nice power plant to work off of.
iv done a few pics. but actually this spring im helping a buddy do his MX exactly like that. we already have alot of the parts needed. now its just mostly me fiberglass work. he wanted to keep the MX rear tails but im trying to talk him into swapign thoes out too.
If Mazda got off of their buts and actually produced this car i think it would be a hit seller. and would probably do very well. provided they give it a nice power plant to work off of.
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
Damn, that looks fuckn nice, except for the wings1zzl3 wrote:n then i got bored
so heres the tunner concept car
lowwered, vertical doors, bigger rims, tinted windows plus the spoiler sum1 requested
p.s call all photoshopping experts. lets make this a beast! haha
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
Now, you just making me want to get the BC2 bodykit instead of the Mazda Speed!!s1zzl3 wrote:im glad most u guys like it, haha n about emailing it to mazda i wouldnt even no how hahahaha
while im here i might as well post another pic of an mx-3 i did up
its the 1 we all no n love
s1zzl.3..
Keep up the great work
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
What you need to do is get in contact with one of the Mazda repss1zzl3 wrote:haha ok i jus sent a message to mazda, i doubt theyll reply. prob jus look at it n scrap it hahaha
o well worth a shot
yeh i photoshoped this pic, from an rx8 n mx3.. the rear, front bumpers as well as the sideskirts and headlights r all rx8 jus warped. i have pics of the step by step process. it looks ugly at first but then i warp it till it looked good , plus i gave it a new paint job cuz the precidia was green n the rx8 silver .
the other red precidia that i posted got a new red finish from the blue it used to be. the rims n exhaust tip i painted bronze. i also tinted the windows n added the new emblem.. not bad hey
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
That looks means1zzl3 wrote:heres sum sketches of the rx7 concept
wit 2 diff front bumpers
1.
and 2.
i need feedback, tell me wat u guys think
The front Bumper is wierd though with the thing in the middle of the grill, Without it, it would look awesome
Other then the front of the car, the back and where the doors are at, remind of of the old 1960s Camaros and Corvettes. The whole thing looks awesome. And mean a-- hell too. A RX-7 like that would defiantley become a favorite with the domestic crowd
What would be even better is a option of a v8 and rotary.
Dosent Ford own pretty much all of Mazda? Hey, supply them with the DOHC 4.6L V8.
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap