Bolt-In, Plug-and-Play Projector Lights
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
After going through all of these, you shouldn't have too many questions wrt light colour, type, intensity, utility, purpose, etc. Hope this helps,
http://faqlight.carpassion.info/
http://www.danielsternlighting.com/prod ... ducts.html
http://www.rallylights.com/hella/headlamps.asp
http://www.accessconnect.com/gts3.htm
http://www.hella.com/produktion/HellaPo ... /Xenon.jsp
Enjoy,
*John*
http://faqlight.carpassion.info/
http://www.danielsternlighting.com/prod ... ducts.html
http://www.rallylights.com/hella/headlamps.asp
http://www.accessconnect.com/gts3.htm
http://www.hella.com/produktion/HellaPo ... /Xenon.jsp
Enjoy,
*John*
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
you could've clicked on the link to the actual pics of the lights from 5 or 6 posts before yours.mitmaks wrote:do these lights have blue glow to them like on luxury cars
http://members.shaw.ca/realworldtuning/ ... ectors.htm
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
Another update, some good news, some bad news:
The second set of prototype brackets from my plastics guys made from my resolved design solved a problem we were having with the rigidity of the mounting surfaces, but the fabrication shop screwed up some of the mounting points, so they are no good. Despite that, the fitment looks like it will be OK, so we are moving ahead with the design of the moulded outer housings - that's the good news.
The bad news - I haven't been able to find a local source for the H9 connectors, so I may not be able to do the pre-wired harnesses. It just wouldn't be cost effective for me to order them from the US, pay duty across the border and shipping, then ship them out again - especially for US customers who would be paying duty AGAIN... I'm still looking, though, so I'm not ruling it out yet.
The second set of prototype brackets from my plastics guys made from my resolved design solved a problem we were having with the rigidity of the mounting surfaces, but the fabrication shop screwed up some of the mounting points, so they are no good. Despite that, the fitment looks like it will be OK, so we are moving ahead with the design of the moulded outer housings - that's the good news.
The bad news - I haven't been able to find a local source for the H9 connectors, so I may not be able to do the pre-wired harnesses. It just wouldn't be cost effective for me to order them from the US, pay duty across the border and shipping, then ship them out again - especially for US customers who would be paying duty AGAIN... I'm still looking, though, so I'm not ruling it out yet.
-
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Thats what i was about to suggest, as long as you box it up b4 you ship it when they ask you what it is, you can say its a gift of blah blah blah, and they will write it up as that. Just give the guy that does it a lil discount on his set for his time and effort
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
-
- Regular Member
- Posts: 339
- Joined: January 9th, 2004, 2:01 am
- Location: Philly
- Contact:
How much (US$) will these go for? Dont feel like reading the whole thread. lol
www.illegalCustoms.com
Tri-State Area Car Club
Tri-State Area Car Club