Custom Gauge Faces
-
- Junior Member
- Posts: 5
- Joined: November 20th, 2005, 7:46 pm
- Location: Honolulu, HI
- Contact:
Custom Gauge Faces
I made gauge faces for the 323F Turbo and they look a lot like the mx3 cluster. Can any one tell me if they are the same?
http://panther37.xtothezracing.com/gaug ... _0-9-0.pdf
Don't worry, MPH is available too.
http://panther37.xtothezracing.com/gaug ... _0-9-0.pdf
Don't worry, MPH is available too.
-
- Junior Member
- Posts: 5
- Joined: November 20th, 2005, 7:46 pm
- Location: Honolulu, HI
- Contact:
does http://panther37.xtothezracing.com work? This is the first time anyone has had issues with my site.Chiggles wrote:Link doesn't open for me.
- den
- Regular Member
- Posts: 197
- Joined: September 27th, 2005, 9:35 pm
- Location: Toronto, Ontario
- Contact:
Yup ! They look the same as mx-2 gauges
1992 Mazda MX-3 GS 5 speed
Reverse glow gauge, Custom CAI, Cross drilled rotors. Toucan front strut tower bar, Custom circular ground wires, Custom exhaust w/ stainless oval dual tip muffler, Custom blue turn indicator lights on gauge panel and switches, performance steering wheel, Pacesetter short shifter
Reverse glow gauge, Custom CAI, Cross drilled rotors. Toucan front strut tower bar, Custom circular ground wires, Custom exhaust w/ stainless oval dual tip muffler, Custom blue turn indicator lights on gauge panel and switches, performance steering wheel, Pacesetter short shifter
- den
- Regular Member
- Posts: 197
- Joined: September 27th, 2005, 9:35 pm
- Location: Toronto, Ontario
- Contact:
Oh wait... it looks a liitle bit different... compare it to this one- http://cgi.ebay.com/ebaymotors/i353-199 ... otohosting
1992 Mazda MX-3 GS 5 speed
Reverse glow gauge, Custom CAI, Cross drilled rotors. Toucan front strut tower bar, Custom circular ground wires, Custom exhaust w/ stainless oval dual tip muffler, Custom blue turn indicator lights on gauge panel and switches, performance steering wheel, Pacesetter short shifter
Reverse glow gauge, Custom CAI, Cross drilled rotors. Toucan front strut tower bar, Custom circular ground wires, Custom exhaust w/ stainless oval dual tip muffler, Custom blue turn indicator lights on gauge panel and switches, performance steering wheel, Pacesetter short shifter
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
If you look closely, your model looks like it has fewer holes, but the ones you have seem to be in about the right places. Also your model is cut on the sides. The MX-3 pic from ebay are completely round.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
Never mind, it was a problem on my end with .PDF files. Acrobat Reader got corrupted somehow. Who knows. Fixed now.Panther37 wrote:does http://panther37.xtothezracing.com work? This is the first time anyone has had issues with my site.Chiggles wrote:Link doesn't open for me.
What I drive: A Cybertronian disguised in the form of a Creek Blue Mica 95 MX-3 GS.
Long term goal: Fabricating a new transformation cog!
Long term goal: Fabricating a new transformation cog!
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
I am looking for a REALLY custom set-up. Can you change your design to my likeing?
I am looking for something that looks pretty much exactly like the newer (3rd Gen) Miata guages.
White faces, black numbers, where only the numbers shine red (not a lit guage face, just the numbers) In the same font as Mazda uses, or something really close to it. MPH, with a 7,000 RPM red line.
I am looking for something that looks pretty much exactly like the newer (3rd Gen) Miata guages.
White faces, black numbers, where only the numbers shine red (not a lit guage face, just the numbers) In the same font as Mazda uses, or something really close to it. MPH, with a 7,000 RPM red line.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
-
- Junior Member
- Posts: 5
- Joined: November 20th, 2005, 7:46 pm
- Location: Honolulu, HI
- Contact:
Thanks for the email, that saves me some work. I wasn't going to even try to sell them until some one said that they fit. I'm just developing in this thread.Custommx3 wrote:Before you attempt to sell these things..
Noone can sell products for profit without contacting Jeff 1st!.
Failure to do so will result in banning.
His email is ubb @ mx-3.com