cold air intake
Hi, I've just got Integra 90-93 CAI with K&N from eBay, but unfortunatelly it's not the two pieces set but only one piece. Can anybody tell me if it's OK only to cut it in the midlle or if it's different and wrong set? Thank you
And pls, appologise me if I'm repeating this question but I'm not familiar with search functions.
And pls, appologise me if I'm repeating this question but I'm not familiar with search functions.
-
- Regular Member
- Posts: 33
- Joined: December 20th, 2004, 2:01 am
- Location: canada
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
This should give you all the info you need at present.robinek wrote:Hi, I've just got Integra 90-93 CAI with K&N from eBay, but unfortunatelly it's not the two pieces set but only one piece. Can anybody tell me if it's OK only to cut it in the midlle or if it's different and wrong set? Thank you
And pls, appologise me if I'm repeating this question but I'm not familiar with search functions.
http://www.mx-3.com/phpbb2/viewtopic.ph ... hlight=cai
Brno, CZ ?? Have you been on the race track there yet? Seen any good GP's?
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
You didn't do that. Instead you made a smart-a-- remark in response to those that helped you when they asked why you didn't search for it yourself. As I said previously, if you have difficulty in using the search function than say so and I'm sure that help will be readily available. As an infrequent user it helps to ask those kind of questions and makes it easier for future queries when you know how to manipulate the search function.jschrauwen wrote: Almost a year on this BB and It's safe guess that you're able to effectively manipulate the search function. If not, than post that query of using the search function in the Off Topic Forum, or better still, use the FAQ section.[/color]
I by no means have this BB thing down pat and still ask for assistance from time to time when I'm unsure of what I'm doing. I'm not sure if others get mad but perhaps get frustrated though when the same topic keeps re-occuring and someone isn't willing to put the necessary time in to find it for themselves. Learning to do it yourself only improves your abilities for future use. Yes, I've sometimes have had minimal response to a few queries and only deduced that the answers weren't available on this BB. This gave me no provocation to make a smart-a-- remark but simply made me look harder and elsewhere for my answers. I imagine that if you're aware of how much time I spend on this BB than you yourself must have spent an extremely significant amount of time lurking (not logging in) to be tracking this in the first place. This gives rise to your experience and exposure to this BB and therefore qualifies those that questioned you as to why do didn't search in the first place. The following may explain why they queried you as to not searching and not Mr Robinek;sirsmokealot wrote:ok see not everyone spends their life on here. and knows how every thing on this site works. but be careful man some people on here get mad if you ask for help
robinek
Junior Member
Age: 27
Gender:
Joined: 22 Jul 2005
Posts: 5
Location: Brno, CZ
sirsmokealot
Junior Member
Age: 25
Gender:
Joined: 20 Dec 2004
Posts: 25
Location: canada
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
ummm ok isn't forums supposted to help people.... When i first came here ya i asked questions who doesn't but when i see people ask questions i help them to the best of my knowledge. And yes some people are wrong but thats why you research and find out what other people think. Hints forums are made!!! Where people can congregate and talk...
1994 toyota supra single turbo
1994 Mazda MX-3 KL-ZE
If god owned a car... It would be a supra!!!
![Image](http://i7.photobucket.com/albums/y296/Legato626/supra%20pics/P1010277x-1.jpg)
1994 Mazda MX-3 KL-ZE
If god owned a car... It would be a supra!!!
![Image](http://i7.photobucket.com/albums/y296/Legato626/supra%20pics/P1010277x-1.jpg)
-
- Regular Member
- Posts: 90
- Joined: August 2nd, 2001, 2:01 am
- Location: nova scotia
- Hoodzy
- Regular Member
- Posts: 1526
- Joined: February 19th, 2005, 4:15 pm
- Location: Calgary, Alberta
- Contact:
http://www.cardomain.com/id/hoodzy13" onclick="window.open(this.href);return false;
http://www.id-studio.ca" onclick="window.open(this.href);return false;
http://www.behance.net/CollinH" onclick="window.open(this.href);return false;
1995 Creek Mica Blue GS
http://www.id-studio.ca" onclick="window.open(this.href);return false;
http://www.behance.net/CollinH" onclick="window.open(this.href);return false;
1995 Creek Mica Blue GS
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
-
- Regular Member
- Posts: 33
- Joined: December 20th, 2004, 2:01 am
- Location: canada
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Marlo, as I have previously said;sirsmokealot wrote:ok John you still havent told everyone what you did. you keep going around the question. and as far to that post about the 94 distributor, rad and fuel pump. that is a family issue that he is gonna try to air out on here and i dont think he should start.
I'd prefer to deal with the present issues since rehashing old stuff is counter-productive. It appears that you may have enough on your plate with previous issues with ninjajim4 and raidermaniac which appears to not have been amicably sorted out 100%. I think we both can agree that persuing this further may not be to your advantage and believe it would be prudent for this BB to close or lock this thread from further degedation.jschrauwen wrote: Best to leave the past in the past and let this one go as a learning experience.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
-
- Regular Member
- Posts: 90
- Joined: August 2nd, 2001, 2:01 am
- Location: nova scotia
. and as far to that post about the 94 distributor, rad and fuel pump. that is a family issue that he is gonna try to air out on here and i dont think he should start.[/quote]
not trying to be an a$$, but i've emailed you 4 or 5 times about my parts and i haven't got them yet so i assumed you didn't check your email. i figured this was the only way to be sure that you get my message,but it seems by your reply apparently you have received my emails. anyway check your pm. i really need my parts now.
not trying to be an a$$, but i've emailed you 4 or 5 times about my parts and i haven't got them yet so i assumed you didn't check your email. i figured this was the only way to be sure that you get my message,but it seems by your reply apparently you have received my emails. anyway check your pm. i really need my parts now.
all the links i found for the cold air intakes that people used the bids are all over already. would this intake work on a klze http://cgi.ebay.com/ebaymotors/90-93-AC ... 8754QQrdZ1
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
These are ZE's;
http://www.mx-3.com/phpbb2/viewtopic.ph ... hlight=cai
![Image](http://www.ctrlaltdel-online.com/temp/cai1.jpg)
my set-up;
![Image](http://www.yourimagelink.com/uploads/b12854f955.jpg)
Gro Harlem’s;
![Image](http://www.projectmazda.com/host/x/ze2.jpg)
![Image](http://projectmazda.com/host/x/ze1.jpg)
http://www.mx-3.com/phpbb2/viewtopic.ph ... hlight=cai
![Image](http://www.ctrlaltdel-online.com/temp/cai2.jpg)
![Image](http://www.ctrlaltdel-online.com/temp/cai1.jpg)
my set-up;
![Image](http://www.yourimagelink.com/uploads/b12854f955.jpg)
Gro Harlem’s;
![Image](http://www.projectmazda.com/host/x/ze2.jpg)
![Image](http://projectmazda.com/host/x/ze1.jpg)
I believe it would since it has all of the necessary bends but integrating that bypass filter may take a little creative thinking.grey mx-3 wrote:all the links i found for the cold air intakes that people used the bids are all over already. would this intake work on a klze http://cgi.ebay.com/ebaymotors/90-93-AC ... 8754QQrdZ1
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
![Image](http://img139.imageshack.us/img139/9572/sigpic28vr.jpg)
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
if i buy the one from psi tuning is it already cut to fix the mx-3? it is also an option to buy extra rubber adapters is that neccesary i know it is if you buy an ebay kit.http://www.psituning.ca/store/product_i ... ucts_id/45