I want to tear into my dashboard vents!

freakyalien · Post by **freakyalien** » October 9th, 2005, 11:31 pm

I'm itching to put blue LEDs behind my dashboard vents

how in the world do i get that thing apart?

it looks like one piece...i'm so confused...

if someone could point me to a helpful resource i'd be very grateful

neutral · Post by **neutral** » October 10th, 2005, 8:58 am

http://www.mx-3.com/95manual/

page S-61

cb mx3 · Post by **cb mx3** » October 10th, 2005, 8:59 am

If its a 94+ dash I recently took mine apart to attempt to change some bulbs. Its still pretty fresh if thats the style dash your taking apart.

freakyalien · Post by **freakyalien** » October 10th, 2005, 10:35 am

Sorry, I completely forgot about that...

94 GS

Hoodzy · Post by **Hoodzy** » October 10th, 2005, 9:44 pm

check appearance FAQ for the indiglo set up, might help u out

ooELMOoo · Post by **ooELMOoo** » October 12th, 2005, 12:44 pm

i orded 4 leds of ebay for 39Cents

CANADIAN Lol .....and put them in my vents...they look amazying at night time...you will be happy once their in...

Legato626 · Post by **Legato626** » October 12th, 2005, 4:23 pm

step one unscrew the panel that touches the door.
step two unscrew every damn bolt you can find =)

thats how i took mine off i just looked for all the screws!

freakyalien · Post by **freakyalien** » October 12th, 2005, 7:03 pm

So basically, its a treasure hunt!

Legato626 · Post by **Legato626** » October 12th, 2005, 9:28 pm

in a way ya lol first when you open your door there is that panel ont he side pop that off there is like 2 or 3 screws. Then take the bottom peace off jsut under the stearing wheel 3 screws i think. then take the main peace off and that will ahve 3 of the 4 vents on it there. The 4th tho never took off that before but jsut look at it and just unscrew it. I took mine off so i can put my new gauges in.