Dyno schedule
Dyno schedule
This is mainly to let Mike, Krish and Uday (and his friend) know that i scheduled the dyno for Weds at 7pm for the 5 of us. but if anyone is interested in seeing how its done or getting info for the place, give me a call and we'll schedule a meet-up either ahead of time or at the place.
- mrspanky79
- Regular Member
- Posts: 575
- Joined: October 2nd, 2001, 2:01 am
- Location: Keswick , Ontario, Canada
- Contact:
-
- Junior Member
- Posts: 3
- Joined: October 4th, 2005, 12:52 pm
- Location: Scarborough, ONT
mike oscar and i stuck around for a WHILE.
there were some other ppl there getting their stuff done, and we were talking to them getting a shiteload of info.
they're actually gonna b at the track on friday too, so if you want some info on breaking 150, u gotta come out to cayuga on friday. i'll cruise down w/ ya.
btw, i did 149 HP @ 5800 RPM
and for some reason have HUGE spikes from the VIS, where nobody else seems to.
dyno graph will b posted soon.
there were some other ppl there getting their stuff done, and we were talking to them getting a shiteload of info.
they're actually gonna b at the track on friday too, so if you want some info on breaking 150, u gotta come out to cayuga on friday. i'll cruise down w/ ya.
btw, i did 149 HP @ 5800 RPM
and for some reason have HUGE spikes from the VIS, where nobody else seems to.
dyno graph will b posted soon.
ok, got them all converted and uploaded. go to the following address.
http://ca.pg.photos.yahoo.com/ph/mclean ... .dir=/3083
for some reason, i don't have torque, only horsepower, still trying to figure out this software.
my torque was 145 ft lbs @ 4800 RPM
http://ca.pg.photos.yahoo.com/ph/mclean ... .dir=/3083
for some reason, i don't have torque, only horsepower, still trying to figure out this software.
my torque was 145 ft lbs @ 4800 RPM
Thanx for the upload Ian..it would seem the four of us were pretty much with 4-7HP of each other....not too bad I guess.
BUt the smoke champ is still you man
BUt the smoke champ is still you man
Friends are just enemies who lack the testicular fortitude to kill you.
I'm a 2min man in a 1min universe
94 GS - KLZE, Spec2 Clutch, Fidanza 9lbs FW, 2 1/4 full magnaflow exhaust. 145WHP / 147WTQ
I'm a 2min man in a 1min universe
94 GS - KLZE, Spec2 Clutch, Fidanza 9lbs FW, 2 1/4 full magnaflow exhaust. 145WHP / 147WTQ
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Hey, do you mind sending me a copy of my files: nd4spdse(at)gmail.com
Not bad for someone runing so rich I was off the scalekp2t wrote:I guess u all beat me with the smoke compititions lol... I WAS CLEAN... so was mike and oscar.....
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Junior Member
- Posts: 3
- Joined: October 4th, 2005, 12:52 pm
- Location: Scarborough, ONT
-
- Junior Member
- Posts: 3
- Joined: October 4th, 2005, 12:52 pm
- Location: Scarborough, ONT
I was clean too! Running quite nice. Though with amount of hot air jetting out of my tailpipes I thought my car was trying to start its own gulf air stream!kp2t wrote:I guess u all beat me with the smoke compititions lol... I WAS CLEAN... so was mike and oscar.....
Last edited by RaZORBLaDeZ on October 6th, 2005, 9:18 am, edited 2 times in total.
1999 Grand Am GT