klze manifold check?
- garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
klze manifold check?
Hello, just brought a KLZE engine, and KL-36 ecu to do the 2.5 conversion. I know there is plenty of info on the klze conversion on the faq, and search.
But the question is that the KLZE i have at the moment has the straight neck IM.
I was just wondering whether it is worth keeping the straight neck and TB ( will check type) or change it for curved neck manifold ( not sure where to source one), or change over the K8 IM and throttle body ( doesnt this reduce hp ??)
This is only the 2nd Ze lump to go into a UK mx-3 so i want to get everything prepared and right.
Cheers
But the question is that the KLZE i have at the moment has the straight neck IM.
I was just wondering whether it is worth keeping the straight neck and TB ( will check type) or change it for curved neck manifold ( not sure where to source one), or change over the K8 IM and throttle body ( doesnt this reduce hp ??)
This is only the 2nd Ze lump to go into a UK mx-3 so i want to get everything prepared and right.
Cheers
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Is it a short neck? Isnt klze a long neck and wont fit? Get a millenia one.. has to have square ports.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
seeing as your steering wheel and a couple other things in your engine bay are mounted reverse to north america, you can probably do a straight neck
swap no problems.
swap no problems.
1994, GS, KLZE, 67mm TB, LightFlywheel, Centreforce Stg 3 Clutch, CAI, KL36 ecu, B&M shortshifter, Solid poly mounts, lightweight Aluminum Cross memeber, 2.5 high flo cat, 2.5 all back, Tanabe Exhaust, optima battery, ZX2 HD tokicos, eibach prokit, black altezzas.....
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
http://www.modifiedmazda.com" onclick="window.open(this.href);return false;.
-
- Regular Member
- Posts: 51
- Joined: March 9th, 2004, 2:01 am
- Location: U.K
From this article it says you can keep the kl-ze manifold on a right hand drive car as it will not hit the brake booster:
http://forums.probetalk.com/archive/ind ... 64445.html
http://forums.probetalk.com/archive/ind ... 64445.html
V6 MX-3, Black, 17" gunmetal chromes with 205/40/17.
Now gone: Autozam AZ-3(Jap spec MX-3). 91, 1498cc DOHC 120bhp as standard. Manual, A.C, 17" black chromes with 205/40/17. Stainless Steel Exhaust,Pipercross Filter, Eco-tek valve, Strut brace, Racing steering wheel.
Now gone: Autozam AZ-3(Jap spec MX-3). 91, 1498cc DOHC 120bhp as standard. Manual, A.C, 17" black chromes with 205/40/17. Stainless Steel Exhaust,Pipercross Filter, Eco-tek valve, Strut brace, Racing steering wheel.
-
- Regular Member
- Posts: 51
- Joined: March 9th, 2004, 2:01 am
- Location: U.K
oh yeah where and for how much did u get the kl-ze and how you getting it fitted?
V6 MX-3, Black, 17" gunmetal chromes with 205/40/17.
Now gone: Autozam AZ-3(Jap spec MX-3). 91, 1498cc DOHC 120bhp as standard. Manual, A.C, 17" black chromes with 205/40/17. Stainless Steel Exhaust,Pipercross Filter, Eco-tek valve, Strut brace, Racing steering wheel.
Now gone: Autozam AZ-3(Jap spec MX-3). 91, 1498cc DOHC 120bhp as standard. Manual, A.C, 17" black chromes with 205/40/17. Stainless Steel Exhaust,Pipercross Filter, Eco-tek valve, Strut brace, Racing steering wheel.
- garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
Cheers. I completely forgot the RHD difference for some reason !!
Brought the engine from onzlouk a uk member. £750 and £100 for ecu. The engine is spotless and the internals are ultra clean. Looks as if the engine has hardly been used.
Havent decided whos going to fit it yet
The list of parts still to get looks like this;
Complete change of all gaskets, and seals.
Clutch ( any recomendations ? )
Water pump
Timing belt.
Drive belts
Think thats it unless anyone else can think of something ive forgot.
Will post pic of engine asap.
Cheers
Brought the engine from onzlouk a uk member. £750 and £100 for ecu. The engine is spotless and the internals are ultra clean. Looks as if the engine has hardly been used.
Havent decided whos going to fit it yet
The list of parts still to get looks like this;
Complete change of all gaskets, and seals.
Clutch ( any recomendations ? )
Water pump
Timing belt.
Drive belts
Think thats it unless anyone else can think of something ive forgot.
Will post pic of engine asap.
Cheers
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
- relisys_3200
- Regular Member
- Posts: 875
- Joined: November 11th, 2004, 2:01 am
- Location: London / Ontario / Canada
- Contact:
- garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
any ideas what mounts to use ?.
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
- garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
I did come across a website for performance motor mounts but ive lost it !!
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.