Sunday August 28,2005 Guelph Meet <PICS ADDED>
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
i found the info for the location. NEW MEET LOCATION is at the A&W on Woodlawn Road (right next to the Galaxy Cinimas). Meets start at 7pm every Sunday.
btw, if i come it'll be in my fiancee's elantra. my mx is still at home in ottawa.
btw, if i come it'll be in my fiancee's elantra. my mx is still at home in ottawa.
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Where the heck in Guelph is this?ovendenk wrote:i found the info for the location. NEW MEET LOCATION is at the A&W on Woodlawn Road (right next to the Galaxy Cinimas). Meets start at 7pm every Sunday.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
According to what I can find, they say it's the A&W on 555 Woodlawn Rd West
This is what I can figure:
Exit off the 401 on Exit 295, HWY6 North
We'll get to a T intersection which is Woodlawn Rd W
(HWY7 is to the left, HWY 6 is to the right, we want HWY 7)
Turn left of Woodlawn Rd W
A&W is 3 blocks up
It's about a 31min drive from the Milton meeting place
I definitely want to come out, but I don't finish work until 6, although I'm only 11minutes away, if you guys don't mind waiting a few minutes for me.
This is what I can figure:
Exit off the 401 on Exit 295, HWY6 North
We'll get to a T intersection which is Woodlawn Rd W
(HWY7 is to the left, HWY 6 is to the right, we want HWY 7)
Turn left of Woodlawn Rd W
A&W is 3 blocks up
It's about a 31min drive from the Milton meeting place
I definitely want to come out, but I don't finish work until 6, although I'm only 11minutes away, if you guys don't mind waiting a few minutes for me.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Easy! You have 2 ways, but you'll know which is faster I'm sure
Take the 21 South to HWY 85/86 South to Kitchener/Waterloo, from there you should (i don't see an ramp on the map, but If i remember right, their that new huge one that just built) to HWY 7 East. Take HWY 7 all the way to Guelph, HWY in Guelph is Woodlawn Rd and the A&W is on there
*If there is no ramp from 86-to-7, exit off the 86 to Wellington and head west, turn left on Lancaster than turn left on Vicoria (heading east) AKA HWY 7
The second way is directly from Elmira, take RR-86 East ALL-THE-WAY to Guelph, AKA Elmira Rd. Turn left onto Woodlawn Rd (HWY 7) and the A&W is a few seconds down. On the left or right I dunno, but it's right there. If you pass Imperial Rd, you've gone too far.
Take the 21 South to HWY 85/86 South to Kitchener/Waterloo, from there you should (i don't see an ramp on the map, but If i remember right, their that new huge one that just built) to HWY 7 East. Take HWY 7 all the way to Guelph, HWY in Guelph is Woodlawn Rd and the A&W is on there
*If there is no ramp from 86-to-7, exit off the 86 to Wellington and head west, turn left on Lancaster than turn left on Vicoria (heading east) AKA HWY 7
The second way is directly from Elmira, take RR-86 East ALL-THE-WAY to Guelph, AKA Elmira Rd. Turn left onto Woodlawn Rd (HWY 7) and the A&W is a few seconds down. On the left or right I dunno, but it's right there. If you pass Imperial Rd, you've gone too far.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- fieromx3
- Supporting Member
- Posts: 2743
- Joined: June 27th, 2005, 7:58 pm
- Location: Guelph, ontario
- Contact:
im srry if i didnt make it clear well i been to gr's every meet almost at the a&w and my bro works at the krown rust control which is 3mins from there i was askin for directions to the mx-3 meet and cruisin with u guys to guelph. i really want to go to ur meet and cruise down with u but i dont think that gonna happen rite now i need gas money and i dont get my pay till wed. and fri. and im broke . well if i can make it down can u gimme directions anyway maybe it will help others to get there as well
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
You'd be backtracking quite a bit, but basically take the 401 East until the 320/HWY25 Exit, it's about 10min from Mississauga, in the city of Milton
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Woohoo!!, got CV joint boot fixed. This isn't shaping up to be very big at all. What's up with that since no one from the GTA went to the Ottawa show, what would everyone else be doing?
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas