ebrake help

ooELMOoo · Post by **ooELMOoo** » August 14th, 2005, 10:04 pm

Just recently my ebrake light has come on....its off untill i accelerate then its stays on til about the end of third gear???any surgestions????

cjthor · Post by **cjthor** » August 14th, 2005, 10:16 pm

ooELMOoo wrote:Just recently my ebrake light has come on....its off untill i accelerate then its stays on til about the end of third gear???any surgestions????

You are low on brake fluid!

ooELMOoo · Post by **ooELMOoo** » August 14th, 2005, 10:20 pm

lol wow ....sometimes i wonder about myself ......thanks for the help i cant believe i forgot the most basic thing...

cjthor · Post by **cjthor** » August 14th, 2005, 10:33 pm

No problem. Let me know if that was the issue.

V8KOMX3 · Post by **V8KOMX3** » August 15th, 2005, 1:04 am

hey I have the same problem I disconnected the piece that sends the message from the handle but to my suprise it still stayed on I have plenty of fluid but I am doing a jdm cluster swap so I am just going to remove the bulb to fix that issue. Other than that I have no Idea why it does it or how to fix it.

PATDIESEL · Post by **PATDIESEL** » August 15th, 2005, 1:26 am

Instead of removeing the sensor from the E-brake handle itself, try unplugging the wire at the resevior. It may have fouled and that is why the light is staying on. If it goes out then plug the handel wire back in. Then get a new sensor so that you'll know when the fluid is low. It could save your life.

ooELMOoo · Post by **ooELMOoo** » August 16th, 2005, 11:50 am

yea mine works fine after the top up..i guess they just didnt do it on the last oilchange .....thanks

V8KOMX3 · Post by **V8KOMX3** » August 16th, 2005, 12:14 pm

I cleaned my sensor and all better now thanks for the advice

Typhoonk · Post by **Typhoonk** » August 20th, 2005, 8:20 pm

check your ebrake at your rear wheel. I think there is a sensor there that could cause a light issue.

MX-3.com

ebrake help

ebrake help

Re: ebrake help