[WTB]Lowering springs and possibly struts

solo_ryder · Post by **solo_ryder** » July 11th, 2005, 9:03 pm

Looking for a set of used lowering springs (or new if a good price) and possibly some struts. If in Canada that would be nice.

Mr_Shorty · Post by **Mr_Shorty** » July 11th, 2005, 9:33 pm

I've got a line on Tokiko Blues. Full set: $600.00 brand new plus tax. They are from the speed shop that I work at and the guy wants to dump them.

solo_ryder · Post by **solo_ryder** » July 11th, 2005, 11:52 pm

sweet, however I am more in the market for springs.

Mr_Shorty · Post by **Mr_Shorty** » July 12th, 2005, 3:07 am

Interested in a set of used coilovers?? Dropzone. Not quite sure if he'll sell them, but maybe?

Mr_Shorty

EZ_4_FUN · Post by **EZ_4_FUN** » July 12th, 2005, 9:23 am

http://www.mx-3.com/phpbb2/viewtopic.php?t=43241

PM Andrew. He still has fairly new ZX-2 struts and Apex springs.

Very reasonable guy!!

hppwdn · Post by **hppwdn** » July 12th, 2005, 11:56 am

Mr_Shorty wrote:I've got a line on Tokiko Blues. Full set: $600.00 brand new plus tax. They are from the speed shop that I work at and the guy wants to dump them.

They sell Tokico Blues for the MX-3 on ebay for $305 shipped.

Dali · Post by **Dali** » July 12th, 2005, 1:22 pm

you still have to factor in shipping, exchange, duty and taxes to ship stuff into canada.

hppwdn · Post by **hppwdn** » July 12th, 2005, 2:06 pm

That would add that much to the price.

I had no idea it could double the cost of something just to send it Canada. I've sent Cams up there and back before and it didn't cost much at all. The cams were $400 something too.

solo_ryder · Post by **solo_ryder** » August 4th, 2005, 1:26 am

still loking for a cheap/reasonable set of used struts/springs, it just gotta lower this POS and get rid of the stock stuff which is blown

solo_ryder · Post by **solo_ryder** » August 12th, 2005, 4:06 am

Mazderati · Post by **Mazderati** » August 12th, 2005, 9:08 am

Solo

I picked up a set of Eibach Pro coils for the Ford ZX2 and a matching set of ZX2 s/r springs (Tokico) off a site for a performance shop in London Ont. He then sent them out here to Calgary for no extra charge. I installed them about 3 months ago now, the only mod being I had to dremmell out the upper strut mounts...5 min job. I'm very happy with the ride and they seem to be working well. You should be able to get both the shocks and struts from him for $5-600. Do a search in the MX-3 search section for more info on the ZX2 conversion.

http://www.seanhylandmotorsport.com/foc ... p?cPath=64

check out this site.

cheers.

solo_ryder · Post by **solo_ryder** » August 12th, 2005, 3:07 pm

dunno why ur laughin lol. How much did this lower ur car?

Mazderati · Post by **Mazderati** » August 12th, 2005, 5:16 pm

After they settled in I'd say about an inch and a half.

As you probably noticed if you checked out that link you should be able to get both for under 5 hundred bucks shipped to Vernon.

install is quite easy, minor tools, rent a coil compressor. You're set!

good luck!