KILLERPICKLE,
What I am asking is this:- When you cut the wire , is the wire from the HEI now going into the LOOM or into the DIST Might seem like a dumb question but its better to be sure than sorry.
Colin - down under
Distributor Mod.
Dist. Mod
Colin ---- down under
accordionservices@xtra.co.nz
accordionservices@xtra.co.nz
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Into the loom. Ensure that the 6th wire does not go into the distributer - esentially by passing the HEI of the distributer. And yes, your right, much better to be sure than sorry.
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
Dist Mod
Anyone can do this MOD [ well almost ]
I was told the Dist. was shot so I did the Mod. & it works!
The circuit diagram - list of parts - & how to is on this Forum courtesy of Gro Harlem.
If you can't find it Email me & I'll send it.
Coin - down under
I was told the Dist. was shot so I did the Mod. & it works!
The circuit diagram - list of parts - & how to is on this Forum courtesy of Gro Harlem.
If you can't find it Email me & I'll send it.
Coin - down under
Colin ---- down under
accordionservices@xtra.co.nz
accordionservices@xtra.co.nz
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Yo,
Check out the frequently asked questions for the v6 and also remember about the 6th wire.
Check out the frequently asked questions for the v6 and also remember about the 6th wire.
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03