Will the 94 dash fit in 92??

TommyTott · Post by **TommyTott** » July 20th, 2005, 5:26 am

My question: Will the 94 Mx3 dash fit in a 92 Mx3 without mods??

mx almere · Post by **mx almere** » July 20th, 2005, 5:54 am

No. Eventually you can get it to fit, but there is VERY much work involved.

TommyTott · Post by **TommyTott** » July 20th, 2005, 5:56 am

What are the major differece??

atlantamx3 · Post by **atlantamx3** » July 20th, 2005, 9:01 am

The correct answer is: YES.

You CAN do it- but its a pain.

TommyTott · Post by **TommyTott** » July 21st, 2005, 1:38 am

Ok.. But is it a pain like there will be gaps and I need to cut and mold, or pain like I need to relocate the places where I attach it?? If you understand me..

mx almere · Post by **mx almere** » July 21st, 2005, 2:05 am

Yes, all the places where it is attached need to be relocated, All the vents are different locations and different shapes. Basically, everything you would expect to be the same, isn't.

TommyTott · Post by **TommyTott** » July 21st, 2005, 3:46 am

A little explaination:

I now have a 94 mx3, imported to Norway from Germany in 1999.. In Norway, we have to pay a lot of money if we want to ad more HP.. But if the car har been in the country for more than 10 years, or before 01.91.1996, it free.. Thats why I want to buy an Mx3 that has been in the country for more than 10 years.. I will try to get me an 94 mod, but almost every Mx3 in this country is imported, and almost every 94 or newer models after 1996.. I havent found any 94 model imported befor 1996..

Thats why I want to buy a 92/93 model, take the dash from the car I have now, an swap with the new car..

So i will have all the vents, mounting brackets and all the other things..
Is it still a pain, when I have it all, or is the places its mounted so different that it have to be cut out an welded back to make it fit??

mx almere · Post by **mx almere** » July 21st, 2005, 4:30 am

Ok.. this is where we reach the point my knowledge stops, but I know someone who has done this.

If you go to http://www.mazdamx-3.nl and register on the forum, "M&M" will be able to answer all your questions on this topic.