How many people want CF scuff plates???
- neverenuff
- Supporting Member
- Posts: 608
- Joined: January 24th, 2002, 2:01 am
- Location: BLACKWOOD N.J.
Well I almost won an Ebay Crowl but I didnt want to pay more then $100 Us and it sold for $115+ $25 shipping. Also, this was for an overlayed CF Crowl. Which by the way I read a few post earlier this month on here about people complianing about that saying " Ohhh it's overlayed and that it was junk" and so on. But after loooking at alot of the CF stuff made the CF is overlayed over fiberglass so if it was layed over the OEM crowl what would be the big deal?
- Tunes67
- Supporting Member
- Posts: 4708
- Joined: January 27th, 2005, 6:36 pm
- Location: Everett, WA
- Contact:
I checked on a replacement cargo cover from mazda.. they wanted $350+ tax. I almost laughed myself out the door.. one of the BB members here (rukick I think sp?) made a really cool cargo cover out of birch wood covered in vinyl. It even had a piano hinge through the middle of it that allowed it to fold up in a A frame position. I think he was selling that one for $75 or so. Material cost of it was probably less than $40. (a fair price for the work involved even if my numbers are off) Basically what I would consider a fair price for a CF cargo cover would be no more than $175 -$200. This is from my vantage point as a buyer. I dont know if you could produce it for this and make a profit or not. And I am sure there are plenty of other people that would be willing to pay more for it. But thats my input on that topicNow, the question, What does everyone think is a reasonable price for the Cowl and cargo cover?
The wiper cowl.. $75-100 sounds fair. Again though.. I dont really know the cost of production (man hours or material costs) I probably wouldnt buy a wiper cowl for my RS.. if it bugs me enough.. eh.. I can always take it off and paint it. Now if I had a MX-3 that was just for fun and not daily commuting.. I would likely get one. Hope this helps.
Tunes67
"So long.. and thanks for all the fish!" "Momma says VW Bugs are the devil" "This one time at band camp.. I stuck a flute in my Throttle Body"
"Screw you guys.. I am goin home"
I am the Cranky God of Mods!!! Tremble before my fury!! LOL
"Screw you guys.. I am goin home"
I am the Cranky God of Mods!!! Tremble before my fury!! LOL
How about a CF rad support ??
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- monty73741
- Forum Moderator
- Posts: 2651
- Joined: February 11th, 2001, 2:01 am
- Location: baltimore,md usa
- Contact:
GAS TANK DOOR
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
whiper cowel and rad support both sound very nice to me.. that and some kind of projector but i don't care what the projector is made of as long as its durable and produces good lighting
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
-
- Supporting Member
- Posts: 425
- Joined: June 2nd, 2002, 2:01 am
- Location: PA
I like the thought of projectors, Id def buy a set if it produced better lighting than stock. They will probably be a lot of work and not worth it to you guys though.
My idea is a rad support that also has a latch for the hood holder rod thing for guys that have a CAI and removed the stock air tube with the latch for the rod. Could that be possible?
My idea is a rad support that also has a latch for the hood holder rod thing for guys that have a CAI and removed the stock air tube with the latch for the rod. Could that be possible?
93 GS-DE,mx6 tranny, obx 2nd gen headers, highflow cat n 2.25" catback, 65mm tb,CAI, mazdaspeed mounts, SPEC Stage I clutch kit, new K8 flywheel, SRD C.A.B., Intrax, S.T. braces
http://www.cardomain.com/memberpage/698108
http://www.cardomain.com/memberpage/698108
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
CF radiator support and front lip (stock style) price... maybe around 200-250 for the lip and 100-150 for the radiaor cover.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP