Meet Sunday May 29

A Forum For Ontario MX-3 Club Related Topics.
User avatar
punkindrublic
Regular Member
Posts: 219
Joined: January 12th, 2004, 2:01 am
Location: Hamilton, Ontario
Contact:

Post by punkindrublic »

if any hamilton people are goin up to oakville or even people from niagara we should meet up at hutch's, then cruise out !!!!
1995 MX-3 GS (black) stock engine... for now hehe...
MSfront... mssides... GS wing...
5" tach w/shift light... A/F, Volt, & Oil Pressure gauges in dash vents... front and rear strut braces....
WORK IN PROGRESS
cdngrl420
Regular Member
Posts: 359
Joined: May 16th, 2005, 12:05 pm
Location: Brantford, Ontario
Contact:

Post by cdngrl420 »

punk if you want i was plannin on leaving brantford like 530/6ish i can meet u closer to the qew on my way out not sure where hutch is
User avatar
Flashpoint2
Regular Member
Posts: 816
Joined: February 15th, 2002, 2:01 am
Location: Calgary AB - For now.

Post by Flashpoint2 »

where is hutchs??? i'll meet if i can find it :D
1996 MX-3 RS - Sold.
2004 RX-8 GS - Yay!
User avatar
punkindrublic
Regular Member
Posts: 219
Joined: January 12th, 2004, 2:01 am
Location: Hamilton, Ontario
Contact:

Post by punkindrublic »

well from the niagara region u take the qew and get off at 20hwy also know as centennial parkway and it leads u onto van wagners

http://ca.maps.yahoo.com/dd_result?newa ... country=ca
here is a map to my house !!!! when u zoom in u will see van wagners and stuff, or u could just come right to my house it dont matter !!!!!!!

and for the brantford person !!! its a little more tricky cuz u would be on the 401 so u would have to exit onto the qew niagara and get off at woodward avenue make a right at the lights then the next set of lights another right which will take u under a overpass, follow that through to the next set of lights, and that is van wagners, make a right until u see the 2 big parking lots
1995 MX-3 GS (black) stock engine... for now hehe...
MSfront... mssides... GS wing...
5" tach w/shift light... A/F, Volt, & Oil Pressure gauges in dash vents... front and rear strut braces....
WORK IN PROGRESS
cdngrl420
Regular Member
Posts: 359
Joined: May 16th, 2005, 12:05 pm
Location: Brantford, Ontario
Contact:

Post by cdngrl420 »

i think id be on the 403 i can get off on the link and take it up to centennial but i have a feeling id be going all thru hamilton and that would take me forever
User avatar
Flashpoint2
Regular Member
Posts: 816
Joined: February 15th, 2002, 2:01 am
Location: Calgary AB - For now.

Post by Flashpoint2 »

well i'm going to go to the mapped route, and meet up at 580 beach rd, I think that's his house :) From there we will cruise to oakville.
1996 MX-3 RS - Sold.
2004 RX-8 GS - Yay!
cdngrl420
Regular Member
Posts: 359
Joined: May 16th, 2005, 12:05 pm
Location: Brantford, Ontario
Contact:

Post by cdngrl420 »

at what time?
User avatar
Flashpoint2
Regular Member
Posts: 816
Joined: February 15th, 2002, 2:01 am
Location: Calgary AB - For now.

Post by Flashpoint2 »

I'm leaving my house at about 5, so I'll get to hamilton sometime around 6ish if I take my time :) Check you pms
1996 MX-3 RS - Sold.
2004 RX-8 GS - Yay!
cdngrl420
Regular Member
Posts: 359
Joined: May 16th, 2005, 12:05 pm
Location: Brantford, Ontario
Contact:

Post by cdngrl420 »

check ur pms
User avatar
punkindrublic
Regular Member
Posts: 219
Joined: January 12th, 2004, 2:01 am
Location: Hamilton, Ontario
Contact:

Post by punkindrublic »

ok 6:30 would be better !!!!!!

your right the 403, take that until u see the QEW/Niagara exit, jump on it,it will lead you over the skyway bridge, but instead of going over the skyway bridge stay to the right and exit the highway onto eastport drive, follow east port drive through the big orange lift bridge after going through that there will be a street on your left, Beach Blvd, u cant miss it its the only place with houses, so make a left off of eastport onto beach blvd all the way to 580 (my house)
1995 MX-3 GS (black) stock engine... for now hehe...
MSfront... mssides... GS wing...
5" tach w/shift light... A/F, Volt, & Oil Pressure gauges in dash vents... front and rear strut braces....
WORK IN PROGRESS
cdngrl420
Regular Member
Posts: 359
Joined: May 16th, 2005, 12:05 pm
Location: Brantford, Ontario
Contact:

Post by cdngrl420 »

k well was gonna meet u guys at hutches but ill be at ur house around 630
check ur pms i left my number incase sumthin happens
User avatar
punkindrublic
Regular Member
Posts: 219
Joined: January 12th, 2004, 2:01 am
Location: Hamilton, Ontario
Contact:

Post by punkindrublic »

all those who are goin straight to oakville dont leave without us !!!!!!!!!!
1995 MX-3 GS (black) stock engine... for now hehe...
MSfront... mssides... GS wing...
5" tach w/shift light... A/F, Volt, & Oil Pressure gauges in dash vents... front and rear strut braces....
WORK IN PROGRESS
User avatar
kp2t
Regular Member
Posts: 1111
Joined: April 30th, 2005, 12:12 am
Location: Halton Hills

Post by kp2t »

i'll be in Oakville for 6:30

i'll go to the parking lot which faces trafalgar, so u guys should see me its a very visible spot
RTT
Regular Member
Posts: 198
Joined: April 30th, 2003, 2:01 am
Location: Oakville
Contact:

Post by RTT »

this is gonna be a great turnout for the first ever WEST END MEET!!!!! ill b there at 6:30ish cant wait to see u all there!!!
User avatar
Nd4SpdSe
Senior Member
Posts: 11212
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Post by Nd4SpdSe »

I'm on my way!
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Post Reply

Return to “Ontario MX-3 Club”