wiring

sirsmokealot · Post by **sirsmokealot** » April 4th, 2005, 8:56 am

does anyone have the wiring for a 94 mazda mx3 v6 manual from the dash and back around the rear end of the car. if not does anyone know why the glow lights for the gage cluster and the back up lights dont work. there is a plug that has 4 wires that goes in between the seat and when that gets pluged in it burns out the fuse for the tailights and shuts off the side marker and tail lights and makes the brake lights come on and stay on. but when this isnt pluged in everything works except for teh backup lights and gage cluster lights. any advice would be great

Typhoonk · Post by **Typhoonk** » April 4th, 2005, 7:08 pm

check for shorts to ground in the system after the plug. Then slowly trace it back.
Sounds like a light plug is shorted........................

93SOHC · Post by **93SOHC** » April 5th, 2005, 1:12 am

install a stereo lately?

sirsmokealot · Post by **sirsmokealot** » April 6th, 2005, 10:04 am

no, i had the car apart to fix the floor and rockers but when i put everything back together i had this problem.