[FS] $5000 MX-3 KLZE!!!!!!!

bubba_03 · Post by **bubba_03** » March 30th, 2005, 9:52 am

I will take $5000 for her right now if anyone is interested!

[edited to comply with the rules]

Well I hate to do this but Im selling my KLZE MX-3. Here is the list of mods:

http://www.cardomain.com/memberpage/822201

-1992 GS 5spd MX-3- No dents, rust, frame damage-nothing! This body is solid
-CF Invader Hood
-Agressor Front End
-GSR Wing
-Real Carbon Fiber Mirrors
-R-1 Red Racing Seats
-Optima Battery
-Polyurethane Lower Control Arm bushings (Installed)
-Polyurethane rear Bushings (Uninstalled)
-Solid Crossmember Bushings
-Poured Polyurethane Motor mounts
-Front & Rear Corksport Strut Bars
-Cross drilled & slotted Brembo Rotors
-Brand New Brake Calipers- Powder Coated Red
-Red Stainless Steel Brake lines
-Stainless Steel Clutch Line
-Brand New Brakes All around
-Oil Pressure Gauge
-5" Tachometer
-Reverse Indiglow Gauges
-HVAC Indiglow Gauge
-Push Start Ignition
-Faze A/F Ratio Gauge
-ZEX Dry Nitrous Kit 55 shot
-Nos Bottle Warmer
-Brand New ZEX Purge Kit
-Brand New Bottle Neck Gauge
-Battery relocation Kit
-CD Player
-Rockford 6.5" Door speakers
-2 12" POLK MOMO SUBWOOFERS
-Real Carbon Fiber Gauge Overlay
-Many extra interior parts to work on while stilling the same thing in the car
-Ichiban Red Shift Boot
-Brand New Carpet
-KL31 ECU ON ITS WAY
-Fully Built ZE Motor:(2,312 miles)
-Ross Racing Forged Pistons 10.1:1
-Millenia S Connecting Rods
-Toga High Performance Bearings Rods & Main
-Toga High Volume Oil Pump
-Modified Oil Pickup screen for better oil pressure
-New Gaskets From head to toe
-New Transmission Gaskets as well
-New Timing Belt
-KL31 Heads have been hot tanked and resurfaced
-New HLA lifters installed
-Heads ported & polished just a little bit for a little extra flow
-Cosmo Racing FPR
-Brand New Fuel Filter
-Outlaw IM & TB Spacers
-Brand New O2 Sensors
-OBX r Version 2 Headers (Made for Mx-3)
-2.5" High-Flow Cat
-2.5" Cat-Back Exhaust
-R-1 Carbon Fiber Exhaust
-Real Carbon Fiber door sills
-NGK plugs
-PRD Distributer Cap
-8mm Taylor Wires
-MSD 6AL Ignition System
-Blaster 2 Coil
-Short Ram Intake
-New Injen Air Filter
-Fidanza 9lbs ALuminum Flywheel
-Stage 1 Clutch Master Clutch
-Recently replaced CV Axels
-Brand New Front Wheel Bearings (Both Sides)
-Red Powder Coated Valve Covers
-Silver Powder Coated Curve Neck IM
-Blacked out Engine Compartment
-NRG Racing Harnesses

CAR IS NOW $6500!

Really great car! When I say things are brand new that means they have 2,312 miles on them because I have most of all the things listed above installed all at once, when the motor was completely rebuilt. The car is green right now but it can be painted to whatever the buyer wishes. I hate to see it go but I dont have any time these days to keep working on her so this would be a great project for some one to finish up and have alot of all the major things taken care of. The only thing you really have to worry about on this car is making it look good! Its already fast I took care of that and my mechanic has over 20 years experience building performance imports. This is the 2nd engine he has ever built for me. First one was a 420A 95 Talon All-Motor putting 203hp to the wheel! He was actually the one who told me about dropping a ZE in my car. Im asking $7000 OBO for everything listed above Including the paint job. Im located in NC. If you would like pics let me know I will e-mail them to you. Thank you.

bubba_03 · Post by **bubba_03** » March 31st, 2005, 11:15 am

Update! Price lowere $7000 paint included. If you want pics hit me back and i'll send them.

bigrich12 · Post by **bigrich12** » March 31st, 2005, 4:01 pm

can you send some pics to bigrich12@hotmail.com. I might be interested.

Gro Harlem · Post by **Gro Harlem** » March 31st, 2005, 4:08 pm

damn man why u sellin??

BTW: I know nope_mx3 wants a set of those rear bushings. He's been buggin me about it and I don't want to part out my full poly set of bushings.

nope-mx3 · Post by **nope-mx3** » March 31st, 2005, 4:12 pm

Yes I am interested

Guess I`m interested in all of these:

Polyurethane rear Bushings (Uninstalled)
-Solid Crossmember Bushings
-Poured Polyurethane Motor mounts

(guess two of them is on the car)

name a price for the rear bushings shipped to Norway.

nope-mx3

Guest · Post by **Guest** » March 31st, 2005, 11:24 pm

I am REALY REALY REALY INTERSTED Please email peterkemp@gmail.com with pictures ASOON AS POSSIBLE

bubba_03 · Post by **bubba_03** » April 1st, 2005, 9:43 pm

Anybody else lookin a car?

bubba_03 · Post by **bubba_03** » April 1st, 2005, 9:58 pm

All pics have been sent to those interested!

liljm0ney · Post by **liljm0ney** » April 1st, 2005, 11:31 pm

hey wassa man i am very intersted can send me pics plz...liljm0ney@yahoo.com...im mostly intersted in the CLUTCH so how much for that also thnx alot..

johnnyb · Post by **johnnyb** » April 2nd, 2005, 10:37 am

hey you planning on building another ZE mx3?

just wondering why you're trying to buy an kl31 if you're selling the car

bubba_03 · Post by **bubba_03** » April 2nd, 2005, 6:05 pm

Im just trying to sell the car with the right ECU for it, So whoever wants doesn't have to go through all the trouble and gets a good deal for their money!

bubba_03 · Post by **bubba_03** » April 3rd, 2005, 5:47 pm

ADDED Some brand new rims and tires to the deal!

bubba_03 · Post by **bubba_03** » April 4th, 2005, 10:13 am

Okay here it is $6500 AS Is, No paint or rims. Just all the parts listed. Need to sell asap!

intcs · Post by **intcs** » April 5th, 2005, 2:02 am

im interested in buying the kl36 chip. pls pm me. thanks

bubba_03 · Post by **bubba_03** » April 5th, 2005, 9:51 am

Okay guys I dont see why Im trying to sell my car if Im going to part with things that make it run! Like hum let me sell the clutch so that I can sell the car and no one be able to drive it! Guys Im not parting anything out. Its the complete car -complete setup. Hate to be d--- but I dont see why everyone thinks Im going to part out a perfectly running car.