First of, The parts I have ready to install and parts that are in the mail to me:
Brembo discs all around
Porterfield R4S pads all around
Konis (at the shop for revalving, shortening etc, being made really stiff)
Ground Controls
Rings for Ground Controls
Hyperco helpersprings
OBX Camberbolts (seems to not fit)
Sabelt 4-point harness x 2
Rollcage (being installed, pics in a few days)
Outlaw engineering thermoblok kit
SRD front control arm bushing
SRD Engine Member Mount Bushings
SS clutch line
Civic projectors (sealed up real good, pics coming soon)
MSD Blaster2 coil + HEI module
Mazdaspeed upper strutmounts
Konig Rated-R 18s (White)
New HEI module & External MSD Blaster2 Coil
Plus some polished valvecovers & Intake manifold
(I also got some other stuff on the way, but thats not being installed this season I think:
Garrett T3 turbo, boostgauge, AFR gauge, Eclipse 3rd gen IC etc)
I`m gonna update this thread often, so stay tuned
![Smile :)](./images/smilies/icon_smile.gif)
nope-mx3
(Will be lots of pics next couple of weeks )
Pics:
This is how it is now, before ALL of these mods:
(oh yeah, this is my winter rims, so before you flame, next pics will have 18s :> )
![Image](http://mx3.nope.no/mx3/panser/panser1.jpg)
![Image](http://mx3.nope.no/mx3/gc/rings2.jpg)
Rings to weld to the strutbody, for centering the GC`s properly.
And to make them 100% safe.
![Image](http://mx3.nope.no/mx3/gc/rings3.jpg)
As you see, I will remove the springmount
![Smile :)](./images/smilies/icon_smile.gif)