Not enough
- Pedro_mx3
- Supporting Member
- Posts: 202
- Joined: November 1st, 2004, 2:01 am
- Location: Co. Tyrone, Northern Ireland
pop onto ebay and you can get the actual cubby hole jobbies or a breakers an just have a root round, my girlfriends mazda has one in but mine doesn't dunno why!!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... eName=WDVW
heres one as an example!!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... eName=WDVW
heres one as an example!!
I'm not worried about the bullet with my name on, Im worried about the one that says 'To Whom it may Concern'....
Make a Donation, Keep Mx3.com Alive!!
1991 V6 K8 -- My baby, i miss her... On her way to car heaven... <3
Make a Donation, Keep Mx3.com Alive!!
1991 V6 K8 -- My baby, i miss her... On her way to car heaven... <3
-
- Regular Member
- Posts: 224
- Joined: February 4th, 2005, 5:14 pm
- Location: UK
- Contact:
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
If that cavity is regular din size then the open storage box from the NA MX's will bolt right in. Don't believe we got the cassette holder appointment in NA MX's.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- jollyroger1965
- Regular Member
- Posts: 35
- Joined: October 11th, 2004, 2:01 am
- Location: West Midlands UK
- Contact:
You could have either have this fitted or a CD storage bit that the same seller sometimes has on auction. see http://cgi.ebay.com/ebaymotors/ws/eBayI ... gory=63691
The original equipment is Clarion - I still have my cassette radio in the loft.Chadley wrote: Would love to get hold of an original mazda cd/cassette/radio but i expect these are rare and expensive?
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Ian, tried to incorporate after market CD unit to original head unit as pictured above by utilizing DIN plug - didn't pan out - bought aftermaket head unit - 10 years ago. Still have paperwork from Mazda on original head unit and stamping on back said it was Fujitsu Ten, Model # CE-3430TY1A, model# on cassette door is 3262. Then again, perhaps Clarion is a subsidiary of Fujitsu Ten.IanL wrote:The original equipment is Clarion - I still have my cassette radio in the loft.
Anyway, real reason for post is that I would dearly love to get my hands on that cup holder appointment. If those pictures are a true indication, than it goes right into an existing single din openning - correct? Didn't even know such an item existed. Any leads on tracking one down would be much appreciated. Would definitely be a much better drive to work in the morning with my favourite cup of "Joe" in a proper holder. Thanks and Cheers.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
-
- Regular Member
- Posts: 224
- Joined: February 4th, 2005, 5:14 pm
- Location: UK
- Contact:
I need a cubby hole in mine there too now, had a HU lying around the house for ages (previous car used some weird setup, that it didn't fit in!)
so now it fits, (tried it... it slides in fine) so now I have only a 1 Din ugly hole... cubby hole will be good for that, esp if its deep.. for CD holding purposes
so now it fits, (tried it... it slides in fine) so now I have only a 1 Din ugly hole... cubby hole will be good for that, esp if its deep.. for CD holding purposes
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
HU?????snellgrove wrote:I need a cubby hole in mine there too now, had a HU lying around the house for ages (previous car used some weird setup, that it didn't fit in!) so now it fits, (tried it... it slides in fine) so now I have only a 1 Din ugly hole... cubby hole will be good for that, esp if its deep.. for CD holding purposes
Are those DIN cup holder unit's a popular / available item to get in the UK? Would really, really, really like to get my hands on one. Typical Canuck - always carrying a travel mug with our favourite coffee....LOL
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
-
- Regular Member
- Posts: 224
- Joined: February 4th, 2005, 5:14 pm
- Location: UK
- Contact:
HU = Head Unit.. my CD player.. sorry, guess its not a common abbreviation!
I dont think those cubby holes are that common.. not at < £5 anyway, you could easily get one from Mazda, -basically you get an MX-5 one and it fits in the MX-3 perfectly, but they're probably > £20 from Mazda, so eBay is the place to go.. where there isn't a huge variety there.
I dont think those cubby holes are that common.. not at < £5 anyway, you could easily get one from Mazda, -basically you get an MX-5 one and it fits in the MX-3 perfectly, but they're probably > £20 from Mazda, so eBay is the place to go.. where there isn't a huge variety there.
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
- Pedro_mx3
- Supporting Member
- Posts: 202
- Joined: November 1st, 2004, 2:01 am
- Location: Co. Tyrone, Northern Ireland
the sun must be shining!!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 88332&rd=1
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... eName=WDVW
ive bought from the 2nd auctioneer before, delivered in 24hours! Sweet!!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 88332&rd=1
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... eName=WDVW
ive bought from the 2nd auctioneer before, delivered in 24hours! Sweet!!
I'm not worried about the bullet with my name on, Im worried about the one that says 'To Whom it may Concern'....
Make a Donation, Keep Mx3.com Alive!!
1991 V6 K8 -- My baby, i miss her... On her way to car heaven... <3
Make a Donation, Keep Mx3.com Alive!!
1991 V6 K8 -- My baby, i miss her... On her way to car heaven... <3
-
- Regular Member
- Posts: 224
- Joined: February 4th, 2005, 5:14 pm
- Location: UK
- Contact: