Just wanted to thank Gro Harlem for the write up on this distributer fix. I recently did this, and it works great.
Total cost about 75 dollars or so.
The HEI was from a 1982 chevette, and that was about 50 dollars. The rest of the wires and connectors made up the 25 dollars extra. I may add an external coil in the summer.
I dont notice any power improvements, nor was I expecting any, but the engine does not cut out any more.
Disty fix works great!
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Disty fix works great!
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03