B6T?
B6T?
Ok I'm not getting much help from the forced induction forum. Maybe you can help me? I have heared about using the 323 turbo header on the dohc rs engine this is something I would like to do.
What is the deal with this whole thing? Is this for real? Where can I go about finding the parts I would need?
Has anyone done this that could give me some detailed instructions?
I would really appreciate it, Thanks
- monty73741
- Forum Moderator
- Posts: 2651
- Joined: February 11th, 2001, 2:01 am
- Location: baltimore,md usa
- Contact:
Re: B6T?
[quote="vtmx3"]
Ur gonna need a
manifold
turbo
rising rate fuel pressure regulator
intercooler(if u want higher boost)
an piggy back or ecu for car
fuel pump
various piping
gauges
custom Down pipe
exhaust
BOV
oil lines
water lines
fittings
http://www.mx-3.com/phpbb2/viewtopic.ph ... ight=turbo
Ur gonna need a
manifold
turbo
rising rate fuel pressure regulator
intercooler(if u want higher boost)
an piggy back or ecu for car
fuel pump
various piping
gauges
custom Down pipe
exhaust
BOV
oil lines
water lines
fittings
http://www.mx-3.com/phpbb2/viewtopic.ph ... ight=turbo
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Re: B6T?
What specifically would you like to know?vtmx3 wrote:
Ok I'm not getting much help from the forced induction forum. Maybe you can help me? I have heared about using the 323 turbo header on the dohc rs engine this is something I would like to do.
What is the deal with this whole thing? Is this for real? Where can I go about finding the parts I would need?
Has anyone done this that could give me some detailed instructions?
I would really appreciate it, Thanks
The deal? Its possible to swap the turbo manifold as opposed to haveing a custom one made.
Junkyards, Maybe even Mazda can source out parts. Sometimes corksport can too pending how motivated they are. Mazda would be cheaper though than corksport.
INstructions? Do a lot of research this can infolve custom Fabtircation work and isnt for the mild minded.
-torp.
I don't own a Mazda.
I don't own a Mazda.
thanks
hey thanks for taking the time to answer my questions. I have been doing quite alot of reserch in general on turbo's and I'm thinking that I could possibly see this mod in the neer future. I tried to look in a salvage yard today but they closed due to a big storm we got up here in Vermont. I'm going to do some more looking on the web to see what I come up with for facts on installs that have been done like this.
Thanks
Thanks
Re: thanks
Be sure to check out the FAQS. They have some information that can be helpful.vtmx3 wrote:hey thanks for taking the time to answer my questions. I have been doing quite alot of reserch in general on turbo's and I'm thinking that I could possibly see this mod in the neer future. I tried to look in a salvage yard today but they closed due to a big storm we got up here in Vermont. I'm going to do some more looking on the web to see what I come up with for facts on installs that have been done like this.
Thanks
Salavgae yards are very hit and miss. A lot of turbos you will find need rebuilds, although you can do it yoruself for a resonable sum as well. If you have any specific questions feel free to shoot me a PM or contact me on aim.
-torp.
I don't own a Mazda.
I don't own a Mazda.