Custom Projector light (01-03 Civic Aftermkt) pics
- SE-Man
- Regular Member
- Posts: 487
- Joined: July 16th, 2001, 2:01 am
- Location: Port Orchard/WA/USA
- Contact:
Re: Custom Projector light (01-03 Civic Aftermkt) pics
What year and type of civic projector was it?
Re: Custom Projector light (01-03 Civic Aftermkt) pics
Been waiting awhile to see projectors on an MX-3. Looks sweet, if you could give us any info on how we all could do this, I know I would appreciate it.
-
- Regular Member
- Posts: 554
- Joined: January 3rd, 2004, 2:01 am
- Location: Ottawa, Ontario
- Contact:
Re: Custom Projector light (01-03 Civic Aftermkt) pics
I want I want I want!
They look great! I would pay for those, much much would you like? If someone is willing to re-fabricate a few sets of these lenses I'd be willing to buy them at a reasonable cost.
Great job!
They look great! I would pay for those, much much would you like? If someone is willing to re-fabricate a few sets of these lenses I'd be willing to buy them at a reasonable cost.
Great job!
My Car Domain Page:
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: Custom Projector light (01-03 Civic Aftermkt) pics
hey thats great idea, are you willing to fabricate some more sets for people on this board?Originally posted by seneca:
I want I want I want!
They look great! I would pay for those, much much would you like? If someone is willing to re-fabricate a few sets of these lenses I'd be willing to buy them at a reasonable cost.
Great job!
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
-
- Regular Member
- Posts: 452
- Joined: May 15th, 2003, 2:01 am
- Location: CLEMSON, SC
- Contact:
Re: Custom Projector light (01-03 Civic Aftermkt) pics
YES! Ever seen Batman? Make the 3-H. project a batman emblem!Originally posted by Gregory Christian:
not sure about the 3rd housing any suggestions ?
MX-3 Owners Club of Atlanta
Clemson Sports Car Club #72
MOCA tuned straight-neck KL-ZE '93 MX-3 GS : Updated: 03/05/06
Clemson Sports Car Club #72
MOCA tuned straight-neck KL-ZE '93 MX-3 GS : Updated: 03/05/06
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
Re: Custom Projector light (01-03 Civic Aftermkt) pics
yeah let us know if you'd be willing to make more and how much
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
- MX3-Freak
- Regular Member
- Posts: 955
- Joined: November 8th, 2003, 2:01 am
- Location: Gig Harbor Washington
- Contact:
Re: Custom Projector light (01-03 Civic Aftermkt) pics
Or you could ship me some "saved" projectors so I can do my own . JK lol....
I have a pretty stupid question; what did you use for the outer piece of what used to be plastic on our cars? I doubt you got the grooves out of the OEM one, so what exactly did you get to make that? Thanks
<small>[ April 25, 2004, 09:27 AM: Message edited by: MX3-Freak ]</small>
I have a pretty stupid question; what did you use for the outer piece of what used to be plastic on our cars? I doubt you got the grooves out of the OEM one, so what exactly did you get to make that? Thanks
<small>[ April 25, 2004, 09:27 AM: Message edited by: MX3-Freak ]</small>
Stock 1995 RS - Creek Blue
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
Car Meanins:
Honda: Hang On, Not Done Accelerating
FORD: Frequently Overhauled, Rarely Driven
Mazda: Must Always Zoom Down Asphalt
- Sam Baker
- Regular Member
- Posts: 1461
- Joined: May 23rd, 2003, 2:01 am
- Location: Wellington, New Zealand
Re: Custom Projector light (01-03 Civic Aftermkt) pics
HAHAHAHHAAOriginally posted by CHANKO:
YES! Ever seen Batman? Make the 3-H. project a batman emblem!
i completely agree
~sam
92 Autozam AZ3
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: Custom Projector light (01-03 Civic Aftermkt) pics
maybe a complete write up on what you did
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
- GregoryChristian
- Supporting Member
- Posts: 1413
- Joined: March 4th, 2003, 2:01 am
- Location: Gulf Coast
Re: Custom Projector light (01-03 Civic Aftermkt) pics
I will be adding a HOW TO page on my cardomain site as for now I am modifying some more brackets and trying to wire the " Angel eyes "
** My MX-3 ** http://www.cardomain.com/ride/360367
Re: Custom Projector light (01-03 Civic Aftermkt) pics
You are the man
Black 94 RS, Erebuni MS style front, OEM sideskirts, Clear signals, altezza tails, 93 seats, Civic projectors
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: Custom Projector light (01-03 Civic Aftermkt) pics
dood, you kick a$$!! can't wait to read that how-to. They look pretty decent for being a custom-fit job. I might buy myself a set for like $130 and take the chance...if i f' em up then, oh well.
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
- GregoryChristian
- Supporting Member
- Posts: 1413
- Joined: March 4th, 2003, 2:01 am
- Location: Gulf Coast
Re: Custom Projector light (01-03 Civic Aftermkt) pics
The projectors are from 2001 Honda Civic and if I come across another set sure no problem, as for the lense I cut to the shape of the mx-3's and kept it a bit larger to fit snugly behind the fender and bumper & to also prevent moisture that occurs in Altezza's you can find the similar light here projectorsOriginally posted by MX3-Freak:
Or you could ship me some "saved" projectors so I can do my own . JK lol....
I have a pretty stupid question; what did you use for the outer piece of what used to be plastic on our cars? I doubt you got the grooves out of the OEM one, so what exactly did you get to make that? Thanks
** My MX-3 ** http://www.cardomain.com/ride/360367
Re: Custom Projector light (01-03 Civic Aftermkt) pics
[/QUOTE]Too much of a hassle to modify the bumper and fenders so did the easy bake oven method , I placed the projectors in oven at 350 degrees until crispy , pried them apart at seams and measured them to the mx-3's... surprisingly not to much difference just larger and odd shaped at edges. I then cut off the excess sealed them back up ... I also had to take off some of the rear to fit it in the radiator support area. not bad for a days work , I think I may put a turn signal into the outer Projector housing ... not sure about the 3rd housing any suggestions ? [/QB][/QUOTE]
Wait, you say you pried them apart and measure them to the mx's...measured what part of the civic lights to what part of the mxs lights?
I must say, that looks SICK. I am definitely going to try that....well done
Wait, you say you pried them apart and measure them to the mx's...measured what part of the civic lights to what part of the mxs lights?
I must say, that looks SICK. I am definitely going to try that....well done
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
My Cardomain site