who need PARTS for a running MX-3
-
- Junior Member
- Posts: 23
- Joined: November 21st, 2000, 2:01 am
- Location: ft worth, tx, USA
- Contact:
who need PARTS for a running MX-3
so far i havent been able to sell my 92 MX-3 to anyone for any reasonable price, so im thinkin i can get more by parting it out, or if anyone out there wants to buy the whole thing.... $900, i have pics, and the car does run just fine, and i did mean FROM a RUNNING MX-3 in the topic<p>[This message has been edited by n0thing68 (edited December 11, 2000).]
-
- Regular Member
- Posts: 64
- Joined: November 26th, 2000, 2:01 am
- Location: London, Ontario, CANADA
Re: who need PARTS for a running MX-3
Have you done any mods to the car? Got any goodies you'd care to part? i.e. clear lenses, spoilers, etc.
94 GS - PRM intake, Thermo spacers, clear signal + side markers, custom, colour-matched window vent guards, custom dual guage pod, front + rear OEM mudguards, colour matched washer fluid nozzles.....
-
- Junior Member
- Posts: 19
- Joined: November 10th, 2000, 2:01 am
- Location: lethbridge, Ab, Canada
Re: who need PARTS for a running MX-3
what color is your car? A buddy of mine and myself are looking for a front air dam and the rear mud gaurds respectively. Oh, and if you have lowering springs I'd like those too :}<BR>
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: who need PARTS for a running MX-3
What model do you have?ie. engine? Condition of parts? If it is the V6, I am interested in your alternator. Send some pics to chris.malden@sk.sympatico.ca<P>Thanks<BR>Chris
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
Re: who need PARTS for a running MX-3
Well to be honest I don't really know what the hell I need, but there is a big crack in the accordian-looking air intake that I taped up...but it doesn't seem to stop the engine light from coming on and my engine from stalling. I have a 1994. Is this an easy part to upgrade or install myself from an old part???
---------
94 Black MX3 GS Manual
94 Black MX3 GS Manual
Re: who need PARTS for a running MX-3
Hey nothing68 I still could use that hood really bad if you want to part with it. Let me know as soon as you can. Talk to you later.<P> Racer X
93' MX3 turbo<BR>My street legal racer<BR>00'ZX2 S/R<BR>Track tested
-
- Junior Member
- Posts: 23
- Joined: November 21st, 2000, 2:01 am
- Location: ft worth, tx, USA
- Contact:
Re: who need PARTS for a running MX-3
ok, its a 92 mazda mx-3 1.6 ltr, manual tranny, with many many highway miles. the only "enhancements" i've given it are tinted window and a bra. the both cv axles, water pump, and mass/airflow sensor are about a year old. the clutch is about 1.5 months old. the car color resembles silver. i have some NEAT hubcaps i put on it that i got from autozone, as well as the fake chrome windshield wipers. as far as i know the engine is in good shape, the only leak it has comes from the oil pan GASKET. most of the interior is intact, carpet need cleaning, dash looks new. the arm rest pad (ya know the thing in the middle that you lift up to reveal the most inconveniently placed cup holder i have ever seen) is damaged, i have the recall letters about the seatbelts, hmmm and a perfectly good spare tire<BR>
-
- Junior Member
- Posts: 23
- Joined: November 21st, 2000, 2:01 am
- Location: ft worth, tx, USA
- Contact:
Re: who need PARTS for a running MX-3
if there is ANY part that you are interested in please email me at n0thing68@hotmail.com and name your price so we can "negotiate"
Re: who need PARTS for a running MX-3
what does a mass/airflow sensor do for you?<BR>is it expensive?
---------
94 Black MX3 GS Manual
94 Black MX3 GS Manual
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: who need PARTS for a running MX-3
yes, MAF sensors are expensive. They are used by the computer to calculate the proper air/fuel ratios, etc. They also limit the tuning possibilities of putting an intake on an MX
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
-
- Junior Member
- Posts: 23
- Joined: November 21st, 2000, 2:01 am
- Location: ft worth, tx, USA
- Contact:
Re: who need PARTS for a running MX-3
i couldnt have said it better myself maldo. the m/a sensor is necessary for the car..it wont run without one..ive tried<P>
Re: who need PARTS for a running MX-3
how much do you want for the taillights.
Re: who need PARTS for a running MX-3
so how much for the driver side headlight??
Matt
94 Corvette Torch Red RS---SOLD
http://www.cardomain.com/member_pages/view_page.pl?page_id=307456
94 Corvette Torch Red RS---SOLD
http://www.cardomain.com/member_pages/view_page.pl?page_id=307456
Re: who need PARTS for a running MX-3
hi..i need front rt ( pass side ) abs sensor,<BR>the dummy that replaced the cv boot hit the damn thing.<BR>if you're interested in parting with your parts, let's talk...timandedith@sympatico.ca
-
- Junior Member
- Posts: 23
- Joined: November 21st, 2000, 2:01 am
- Location: ft worth, tx, USA
- Contact:
Re: who need PARTS for a running MX-3
how about..how much are yall willing to pay for these items<BR>