clear turn signals

Guest · Post by **Guest** » June 6th, 2003, 1:12 pm

I went to the junk yard and got the housing and cover then took the cover made a mould out of it now I can make clear,red,blue,green any color you want,PS I work with epoxies and Urethanes so I,m Going to have alot more experiments to come.

[ June 06, 2003: Message edited by: MORBIDEL BOB ]

Guest · Post by **Guest** » June 6th, 2003, 1:13 pm

the reason I posted here is because I,d like to help the Toronto MX-3 scene

Andrew_Pakula · Post by **Andrew_Pakula** » June 6th, 2003, 1:32 pm

Which junk yard did you go to?

Guest · Post by **Guest** » June 6th, 2003, 1:46 pm

I went to the one in Milton not sure what it was called

Andrew_Pakula · Post by **Andrew_Pakula** » June 6th, 2003, 2:58 pm

Where is it exactly? I might be in that area tomorrow actually and would like to look around there for stuff

macnwigs · Post by **macnwigs** » June 6th, 2003, 4:18 pm

It's called Mega city and it's on a side road off Steeles between Hornby and Milton. If your going west on steeles, just past the ball park on the right hand side you'll see a sign. Go north through one intersection and it's on the left hand side.......They have about 6 or so really picked MX-3's.....some interior parts, no v6 engine parts....

macnwigs · Post by **macnwigs** » June 6th, 2003, 4:20 pm

ps.... how much for a set of clear turn signals???

shocker · Post by **shocker** » June 6th, 2003, 4:36 pm

Its on sixth line north of steeles in milton. i was there the other day but they only had a couple of mx3s, nothing really special. and ya how much for the clear turn signals?

RCaputi · Post by **RCaputi** » June 8th, 2003, 4:46 pm

<blockquote>quote:<hr>Originally posted by MORBIDEL BOB:
I went to the junk yard and got the housing and cover then took the cover made a mould out of it now I can make clear,red,blue,green any color you want,PS I work with epoxies and Urethanes so I,m Going to have alot more experiments to come. [ June 06, 2003: Message edited by: MORBIDEL BOB ]<hr></blockquote>Yeah how much?
Pics?

Guest · Post by **Guest** » June 9th, 2003, 12:11 pm

these are the lenses,I'm thinking $10.00 for a set , I'm also going to make the side ones,I have'nt experimented yet but I also want to put symbols or writing in the lenses;)[ June 09, 2003: Message edited by: MORBIDEL BOB ]

shocker · Post by **shocker** » June 9th, 2003, 1:48 pm

Those look good. I'll take a set of clear ones. Le me know when you have some ready, I can even pick them up from you.

Guest · Post by **Guest** » June 9th, 2003, 2:13 pm

Those pics are from corksport web site as an example of which ones I'm talking about, As for the condition of mine it all comes with experience of pouring these into the mould with no bubbles, I have vacuum chambers at work but this only helps for 80% of bubbles the rest like I said is from experience. On My second try I only had two or three very tiny bubbles that you could not notice when there on the car

Guest · Post by **Guest** » June 9th, 2003, 2:17 pm

I will have some ready for the annual meet.They do look identical to corksports.
[ June 09, 2003: Message edited by: MORBIDEL BOB ][ June 09, 2003: Message edited by: MORBIDEL BOB ]

zytariuk · Post by **zytariuk** » June 9th, 2003, 4:25 pm

MORBIDEL BOB,I'll take two sets (one for DVH and one for myself). Check you're email bud...[ June 09, 2003: Message edited by: zytariuk ]

macnwigs · Post by **macnwigs** » June 9th, 2003, 5:12 pm

i'll take a set....
and front and back side markers if your gonna make those too

MX-3.com

clear turn signals

clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals

Re: clear turn signals