GS 0-60 times?
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
GS 0-60 times?
Whats the normal 0-60 on a stock k8 manual tranny mx3??? I need this to make sure i have my car tuned properly and aligned and all that, also i wanna know to check if im running rich, assuming this would slow me down.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Regular Member
- Posts: 341
- Joined: December 17th, 2001, 2:01 am
- Location: Bridgetown, Barbados
- Contact:
Re: GS 0-60 times?
I believe it is around 8.6 secs for the GS V6 version of the MX3
JSpec Turbo MX3 (1.6 DOHC)
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
http://www.cardomain.com/memberpage/310985
Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
-
- Regular Member
- Posts: 909
- Joined: March 15th, 2004, 2:01 am
- Location: Karlskrona, Sweden
- Contact:
Re: GS 0-60 times?
8.5 secs
Re: GS 0-60 times?
I think its between slow and really slow.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
My Cardomain site
Re: GS 0-60 times?
i dunt think u can do it 8.5 .....thats with like perfect condition stuff and clutch.. and perfect shifting too... i think around 10 secs..
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: GS 0-60 times?
car stats says 9.2 or something like that but i know its faster, mine is anyways, depends on engine, how beat up it is, tranny, clutch and most of all DRIVER
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Re: GS 0-60 times?
if you shift at redline and dont shift to third gear, it should hit less than 8.5 seconds.
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: GS 0-60 times?
A broken in car is faster than a brand new car. There's no way in hell my car's takes 10 seconds. That's automatic Accord 4-cyl. territory.Originally posted by lok:
i dunt think u can do it 8.5 .....thats with like perfect condition stuff and clutch.. and perfect shifting too... i think around 10 secs..
Re: GS 0-60 times?
I wouldnt knock accords that much some of them would suprise you.Originally posted by lakersfan1:
A broken in car is faster than a brand new car. There's no way in hell my car's takes 10 seconds. That's automatic Accord 4-cyl. territory.Originally posted by lok:
i dunt think u can do it 8.5 .....thats with like perfect condition stuff and clutch.. and perfect shifting too... i think around 10 secs..
Either way stock mx-3s are not quick 10 seconds does sound way more accurate than 8.5 I could see it being in the mid to high 9s though.
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: GS 0-60 times?
No way in hell. If you're running that slow to 60, your car needs a tuneup, or you're shifting like a granny. Especially considering you only need one shift to get to 60 - it'll do a little over 60 MPH in second gear.Originally posted by torpedan:
I wouldnt knock accords that much some of them would suprise you.Originally posted by lakersfan1:
A broken in car is faster than a brand new car. There's no way in hell my car's takes 10 seconds. That's automatic Accord 4-cyl. territory.Originally posted by lok:
i dunt think u can do it 8.5 .....thats with like perfect condition stuff and clutch.. and perfect shifting too... i think around 10 secs..
Either way stock mx-3s are not quick 10 seconds does sound way more accurate than 8.5 I could see it being in the mid to high 9s though.
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: GS 0-60 times?
I was noticing that. Usually 2 or 3 gears is all it takes..
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: GS 0-60 times?
then they whine in Tech forum "my tranny doesnt work, whats wrong?!?!"
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
Re: GS 0-60 times?
1992 Mazda MX-3 GS 9.2 16.8
1993 Mazda MX-3 10.3 17.6
Guess it needs work out of the box. Rings dont last forever. Most of the motors on this fourm are not in there prime's either.
source btw:
http://www.albeedigital.com/supercoupe/articles/0-60times.html
lots of fun info to look ta there too =]
<small>[ August 17, 2004, 02:34 AM: Message edited by: torpedan ]</small>
1993 Mazda MX-3 10.3 17.6
Guess it needs work out of the box. Rings dont last forever. Most of the motors on this fourm are not in there prime's either.
source btw:
http://www.albeedigital.com/supercoupe/articles/0-60times.html
lots of fun info to look ta there too =]
<small>[ August 17, 2004, 02:34 AM: Message edited by: torpedan ]</small>
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: GS 0-60 times?
That still seems too slow. My old 93 Sentra XE could do a 9.2 0-60, and the GS was made to compete against SE-R. I seem to remember the GS being a couple tenths behind the SE-R. 9.2 for the GS sounds more like its 5-60 time, not 0-60.Originally posted by torpedan:
1992 Mazda MX-3 GS 9.2 16.8
1993 Mazda MX-3 10.3 17.6
-
- Supporting Member
- Posts: 730
- Joined: January 11th, 2003, 2:01 am
- Location: Jacksonville, FL Area
Re: GS 0-60 times?
Wow! I got addicted to that site. I was comparing my est. 14.5 w/ modded ZE to some of those times, and it looks like a stock early 90's Mustang Cobra would be around the same times! Then again, where are you gonna find a stock Cobra that's not driven by some I'm-past-forty-but-I-still-want-to-look-young-so-I-got-a-facelift-and-a-new-car type?
'93 GS sporting 31 ZE, 36 ECU, Millenia IM & TB, Beefed up tranny, Fidanza FW, CM Stage II-R, Al UDP, HS Headers, MF Hi-Flow CAT, 2.5" Piping, CAI, MGC Wires, MS Mounts, B&M SS, Bronzoils, SS B & C Lines, Brembos...more.
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."
Oh yeah, I have a stock ATX 92 RS too.
"Everyone wants to live life in the fast lane; I have more fun weaving through traffic."