New 1/4 Times

A forum for Drag Strip/Track Racing Discussions. (NO Street Racing or Kill Stories, they WILL be deleted.)
Post Reply
your2slow
Regular Member
Posts: 301
Joined: November 4th, 2002, 2:01 am
Location: Ontario
Contact:

New 1/4 Times

Post by your2slow »

Well I went back to sparta last night and ran a best of 15.761.
Here is the slip info:
1.267 - reaction
2.355 - 60 ft
6.749 - 330 ft
10.279 - 1/8 ET
70.07 - 1/8 MPH
15.761 - 1/4 ET
89.30 - 1/4 MPH.

Only difference from the last time (which was 16.1) is the new headers and 2.5 full exhaust system i got. No to bad for new headers and exhaust i think. Only need the ecu and should be int he 14's. :) :froggie_red:
KL-ZE, Custom Intake, Apex Lowering Springs, and more to come this year.

Toronto Mx-3 Club
My Cardomain Site
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: New 1/4 Times

Post by babyblueMX3 »

I'm going to the track tonight..I'll let you know how I'll do..everythning works fine this time :)
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
osargeant
Regular Member
Posts: 341
Joined: December 17th, 2001, 2:01 am
Location: Bridgetown, Barbados
Contact:

Re: New 1/4 Times

Post by osargeant »

Nice to see you are improving but that time of 15.761 is still slow for the type of motor and mods you have. Hopefully the new ECU will sort out things since I feel you should be doing high 14s comfortably. You might also need to practice launching the car. Good luck.

Turbo MX3
15.0 @93.5mph
http://www.cardomain.com/member_pages/view_page.pl?page_id=310985

<small>[ July 03, 2004, 04:25 PM: Message edited by: mx3dohc16 ]</small>
JSpec Turbo MX3 (1.6 DOHC)
http://www.cardomain.com/memberpage/310985

Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
your2slow
Regular Member
Posts: 301
Joined: November 4th, 2002, 2:01 am
Location: Ontario
Contact:

Re: New 1/4 Times

Post by your2slow »

Well I think the issue with the engine is that my car is a Dec 28th 95 model (so technically a 96 as per the VN number). So that means my car is using OBD2 wiring and has 4 O2 sensors. Now since I changed Headers they only came with 2 sockets to add O2 sensors. So now i'm only running 2 O2 sensors and I think the ECU is cutting out after it doesn't detect the 3rd and 4th sensors. So what I'm going to do is switch from OBDII to OBDI and get an 03 or ze ecu. Should make it mid to high 14's (I HOPE).

If anyone can confirm this as being the main issue please let me know :shrug:

<small>[ July 03, 2004, 05:45 PM: Message edited by: your2slow ]</small>
KL-ZE, Custom Intake, Apex Lowering Springs, and more to come this year.

Toronto Mx-3 Club
My Cardomain Site
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: New 1/4 Times

Post by babyblueMX3 »

well i jsut came home from the track..i did 2 runs...it was a 30 degree celcius...
best pass was 14.565 @ 94.443mph..
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
your2slow
Regular Member
Posts: 301
Joined: November 4th, 2002, 2:01 am
Location: Ontario
Contact:

Re: New 1/4 Times

Post by your2slow »

Originally posted by babyblueMX3:
well i jsut came home from the track..i did 2 runs...it was a 30 degree celcius...
best pass was 14.565 @ 94.443mph..
Very Nice. :2thumbsup: I'm hoping to be in that time very soon.
KL-ZE, Custom Intake, Apex Lowering Springs, and more to come this year.

Toronto Mx-3 Club
My Cardomain Site
Macen
Regular Member
Posts: 909
Joined: March 15th, 2004, 2:01 am
Location: Karlskrona, Sweden
Contact:

Re: New 1/4 Times

Post by Macen »

A guy here in Sweden got 15.1 sec (0-402m) and 6.9 sec 0-100km/h. And that's with a KL-DE and the intake, ECU and VAF from the 1.8.
Black '93 GS-RL KL-DE
White '95 RX-7 Type R Bathurst
http://macen.nullnet.com
timpronk
Regular Member
Posts: 603
Joined: August 2nd, 2001, 2:01 am
Location: Brantford, Ontario, Canada
Contact:

Re: New 1/4 Times

Post by timpronk »

your2slow, shoot me an email/pm next time you go to sparta. Maybe we can run there together.
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
Macen
Regular Member
Posts: 909
Joined: March 15th, 2004, 2:01 am
Location: Karlskrona, Sweden
Contact:

Re: New 1/4 Times

Post by Macen »

New time for the KL-DE now with KL-DE ECU and VAF:

0-100: 6,20 sek
0-402m: 14,14 sek/163 km/h
Black '93 GS-RL KL-DE
White '95 RX-7 Type R Bathurst
http://macen.nullnet.com
Post Reply

Return to “Drag Strip/Track Racing”