0-60 times on Ze with ecu?
0-60 times on Ze with ecu?
hey everyone like the subject sez im just curious about what the mx-3 will do with a ze and its ze ecu.
0-60mph or 0-100kph... thanx
0-60mph or 0-100kph... thanx
-Damian
***if u know of/have a mx-3 GS with a blown engine and live around me... let me know ***
***if u know of/have a mx-3 GS with a blown engine and live around me... let me know ***
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Re: 0-60 times on Ze with ecu?
i dont have a gtech or anything but Im going to guess with decent traction 5.5-6.0 seconds
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
-
- Regular Member
- Posts: 452
- Joined: May 15th, 2003, 2:01 am
- Location: CLEMSON, SC
- Contact:
Re: 0-60 times on Ze with ecu?
Hey Killa,
Would you recommend your CM III for a ZE? I've heard some negative things about the CM II "R"...wondering if I should splurge or not.
Thanks,
Would you recommend your CM III for a ZE? I've heard some negative things about the CM II "R"...wondering if I should splurge or not.
Thanks,
MX-3 Owners Club of Atlanta
Clemson Sports Car Club #72
MOCA tuned straight-neck KL-ZE '93 MX-3 GS : Updated: 03/05/06
Clemson Sports Car Club #72
MOCA tuned straight-neck KL-ZE '93 MX-3 GS : Updated: 03/05/06
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Re: 0-60 times on Ze with ecu?
aaron do you miss your car
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Re: 0-60 times on Ze with ecu?
(at least your honest...)
Somebody must have taken a gtech to this baby. I know its not 100% accurate but its close enough. Im trying to purchase the gtech pro or something similar...I think it has great tuning potential, especially for someone that doesn't and cannot go to the track 2-3 tims a week.
Somebody must have taken a gtech to this baby. I know its not 100% accurate but its close enough. Im trying to purchase the gtech pro or something similar...I think it has great tuning potential, especially for someone that doesn't and cannot go to the track 2-3 tims a week.
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
Re: 0-60 times on Ze with ecu?
AAron, what mods did you have? I know you had a klze and nitrous, correct? Was it stripped or what??
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
My Cardomain site
-
- Regular Member
- Posts: 1749
- Joined: April 17th, 2002, 2:01 am
- Location: Okotoks, Alberta Canada
- Contact:
Re: 0-60 times on Ze with ecu?
aarons car was almost a pure race car, gutted interior, plexi-glass rear hatch glass, rear hatch frame was cut up to lighten it, drag radial tires then he went to slicks, ect. it was ment to be driven to the track and raced hard.
it still had the dash, and it didnt have a rollcage.
it still had the dash, and it didnt have a rollcage.
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: 0-60 times on Ze with ecu?
still had full doors(they are heavy little bastards) I did the 13.023 with the cat on
<small>[ March 17, 2004, 07:08 PM: Message edited by: aaron the hic ]</small>
<small>[ March 17, 2004, 07:08 PM: Message edited by: aaron the hic ]</small>
13.023 @ 105 mph
-
- Regular Member
- Posts: 583
- Joined: September 16th, 2002, 2:01 am
- Location: Hartford, CT
Re: 0-60 times on Ze with ecu?
You think you could take a full second off of your ET by taking out the dash, door panels, sunroof motor, shifter boot, and getting "lightweight pedals"??? please please please tell me that was a joke
Sold my 95 RS "Little Peanut" but she will never be forgotten.
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada