December Drag Board
December Drag Board
Mx-3.com Drag Board
With Aaron new project comes the passing of a old one. Unless there is massive public objection i will resume maintenence of the top drag board with a few minor changes to try to let some people get a stake in.
These lists were compiled Using Aaron old drag boards and the responses to them. If you have a correction please send me a PM and if you have a addition please post it along with you list of modifications. Time-slips may be required. All Vehicles must be non-professional front drive Mazda designed. Times will not be posted unless they meet the above criteria
Mx-3.com Top 20 Free for All.
1. 1sickmx6 12.74@108 ze n20
2. Tim's mx-3 12.95@109.5 kl03,n2o,275whp
3. aaronthehic 13.023@105 n2o(41/29), ze,ze-ecu,adj. fuel reg., 2.5' exhaust, cat, no alt,no p.steering,plexi hatch k+n, cai, cm4, sht. shift, lwrd, slicks, no seats
4. 93mxrgs 13.23@107 klde,n2o
5. Gabi 14.29@98 ze
6. XxAntwawnxX 14.450@95 ze,probe IM, 2.5' exaust with cat, stripped.
7. smoking mx3 14.47@96 ze, ze-ecu, headers, no cat, lowered
8. Cjthor 14.62@99 b6-ze+mods, stripped, slicks, n2o.
9. thebonestockkid 14.648@ 93 klde, apexi cai, 2.5" exhaust, highflow cat, cm stage 1, intrax springs, gutted hatch.
10. Nd4SpdSe 14.76@91.51Mph ze, bully stg 2 clutch, 2.5" exaust, 1sickmx6 driving
11. Hex3 14.8@93 ze, nitto 450
12. Lieden 14.82@98 ze, stock
13. 94mx3rsr 14.850@96 bp turbo, euro spec fuel mapping
14. Vlad 15.008@92 kl03, cai, 2.25" catback, lwrd.
15. Kurtze 15.04@? ze_bonestock
16. Wkdmx3gsr 15.1@? ze, catback, nitto555
17. Nolanspawn 15.680@86.6 93 2L probe
18. Jspec 15.8@? ze-bonestock???
19. Max 15.84@87 k8, k+n, cai, catback, kvr rotors, srd frnt cross member, srd lwr tie bar.
20.Mazadamxstyle 15.92@87 k8, cai, 2.5" catback, 2350lb
Top 5 Mx-3.com V6 N/A
1. Gabi 14.29@98 ze
2. XxAntwawnxX 14.450@95 ze,probe IM, 2.5' exaust with cat, stripped.
3. smoking mx3 14.47@96 ze, ze-ecu, headers, no cat, lowered
4. thebonestockkid 14.648@ 93 klde, apexi cai, 2.5" exhaust, highflow cat, cm stage 1, intrax springs, gutted hatch.
5. Nd4SpdSe 14.76@91.51Mph ze, bully stg 2 clutch, 2.5" exaust, 1sickmx6 driving
Top 5 Mx-3.com I4 N/A
(Dug for a while. I saw a reference to one but couldn't find the exact time Get em posted!)
1. torpedan 15.558 @ 88.9 MPH - BPD, Gutted(2290lbs w/driver), Indigo Flywheel, UDP, 1 7/8 exhaust, Nology Wires
2. Nolanspawn 15.680@86.6 93 2L probe , Weight reduction, every bolt on money can buy.
3. xXx_OTEP_xXx 17.7@76 @ 76.? here, cone filter, 2.25" cat-back exhaust
4. Mike - 17.7892 @75.2968 mph (stock?)
5. (This spot could be yours)
<small>[ December 03, 2003, 07:29 PM: Message edited by: torpedan ]</small>
With Aaron new project comes the passing of a old one. Unless there is massive public objection i will resume maintenence of the top drag board with a few minor changes to try to let some people get a stake in.
These lists were compiled Using Aaron old drag boards and the responses to them. If you have a correction please send me a PM and if you have a addition please post it along with you list of modifications. Time-slips may be required. All Vehicles must be non-professional front drive Mazda designed. Times will not be posted unless they meet the above criteria
Mx-3.com Top 20 Free for All.
1. 1sickmx6 12.74@108 ze n20
2. Tim's mx-3 12.95@109.5 kl03,n2o,275whp
3. aaronthehic 13.023@105 n2o(41/29), ze,ze-ecu,adj. fuel reg., 2.5' exhaust, cat, no alt,no p.steering,plexi hatch k+n, cai, cm4, sht. shift, lwrd, slicks, no seats
4. 93mxrgs 13.23@107 klde,n2o
5. Gabi 14.29@98 ze
6. XxAntwawnxX 14.450@95 ze,probe IM, 2.5' exaust with cat, stripped.
7. smoking mx3 14.47@96 ze, ze-ecu, headers, no cat, lowered
8. Cjthor 14.62@99 b6-ze+mods, stripped, slicks, n2o.
9. thebonestockkid 14.648@ 93 klde, apexi cai, 2.5" exhaust, highflow cat, cm stage 1, intrax springs, gutted hatch.
10. Nd4SpdSe 14.76@91.51Mph ze, bully stg 2 clutch, 2.5" exaust, 1sickmx6 driving
11. Hex3 14.8@93 ze, nitto 450
12. Lieden 14.82@98 ze, stock
13. 94mx3rsr 14.850@96 bp turbo, euro spec fuel mapping
14. Vlad 15.008@92 kl03, cai, 2.25" catback, lwrd.
15. Kurtze 15.04@? ze_bonestock
16. Wkdmx3gsr 15.1@? ze, catback, nitto555
17. Nolanspawn 15.680@86.6 93 2L probe
18. Jspec 15.8@? ze-bonestock???
19. Max 15.84@87 k8, k+n, cai, catback, kvr rotors, srd frnt cross member, srd lwr tie bar.
20.Mazadamxstyle 15.92@87 k8, cai, 2.5" catback, 2350lb
Top 5 Mx-3.com V6 N/A
1. Gabi 14.29@98 ze
2. XxAntwawnxX 14.450@95 ze,probe IM, 2.5' exaust with cat, stripped.
3. smoking mx3 14.47@96 ze, ze-ecu, headers, no cat, lowered
4. thebonestockkid 14.648@ 93 klde, apexi cai, 2.5" exhaust, highflow cat, cm stage 1, intrax springs, gutted hatch.
5. Nd4SpdSe 14.76@91.51Mph ze, bully stg 2 clutch, 2.5" exaust, 1sickmx6 driving
Top 5 Mx-3.com I4 N/A
(Dug for a while. I saw a reference to one but couldn't find the exact time Get em posted!)
1. torpedan 15.558 @ 88.9 MPH - BPD, Gutted(2290lbs w/driver), Indigo Flywheel, UDP, 1 7/8 exhaust, Nology Wires
2. Nolanspawn 15.680@86.6 93 2L probe , Weight reduction, every bolt on money can buy.
3. xXx_OTEP_xXx 17.7@76 @ 76.? here, cone filter, 2.25" cat-back exhaust
4. Mike - 17.7892 @75.2968 mph (stock?)
5. (This spot could be yours)
<small>[ December 03, 2003, 07:29 PM: Message edited by: torpedan ]</small>
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Regular Member
- Posts: 498
- Joined: April 3rd, 2002, 2:01 am
- Location: Bolton, Ontario, Canada
Re: December Drag Board
i ran 14.6 N/A with my de... why arent i in the top 5 NA? hmmm? lol jk :p
![Image](http://i5.photobucket.com/albums/y181/hitz1035/s510595978_1374896_9416-1.jpg)
'92 Intense blue pearl Jeep YJ, OME lift, mudders, fun.
R.I.P.
'93 Clear white GS-DE ~14.648@92.98mph, 2.234 60ft. PARTING OUT PM ME.
Re: December Drag Board
HEhehe Gotta have the list of mods. Not stock just is throw in the top section.
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Regular Member
- Posts: 498
- Joined: April 3rd, 2002, 2:01 am
- Location: Bolton, Ontario, Canada
Re: December Drag Board
what does it matter... the car IS N/A after all.. lol..
klde, apexi cai, 2.5" exhaust, highflow cat, cm stage 1, intrax springs, gutted hatch. thats it![Shrug :shrug:](./images/smilies/shrug.gif)
klde, apexi cai, 2.5" exhaust, highflow cat, cm stage 1, intrax springs, gutted hatch. thats it
![Shrug :shrug:](./images/smilies/shrug.gif)
![Image](http://i5.photobucket.com/albums/y181/hitz1035/s510595978_1374896_9416-1.jpg)
'92 Intense blue pearl Jeep YJ, OME lift, mudders, fun.
R.I.P.
'93 Clear white GS-DE ~14.648@92.98mph, 2.234 60ft. PARTING OUT PM ME.
Re: December Drag Board
I am king leader of the board!!!
LOL It is nice to finally be on top.
If anyone is intrested I have the nitrous kit and some nitrous parts for sale message me.
Later 1SICKMX6!
LOL It is nice to finally be on top.
If anyone is intrested I have the nitrous kit and some nitrous parts for sale message me.
Later 1SICKMX6!
93 MX6 Black Plate "1SICKMX6"
-
- Regular Member
- Posts: 629
- Joined: November 21st, 2002, 2:01 am
- Location: Weyers Cave, VA
- Contact:
Re: December Drag Board
All I have to say Mr. Sick MX-6 is divide it in half, cuz my MX-3 WILL be the 2nd fastest only to Daves car come this summer (my R&D won't be finished untill tracks are long closed). Once my car is done I'm planning on taking the title as FASTEST MX-3 ever! Possibly burring it in the 9's for the 1/4 mile. ![Freak :freak:](./images/smilies/freak.gif)
![Freak :freak:](./images/smilies/freak.gif)
http://www.cardomain.com/ride/354836
B6T, APEXi Silvia IC, HKS SSQV, Magnacore KV85 Wires, NGK V-Power, Haltech E6K, Accel 300+ Digital Ign w/ coil, Accel 375+ controller, JWMmotorsports turbo manifold & exhaust, custom Garret GT-R series turbo, MAZDASPEED mounts, SRD Bushings, Pacesetter Short Shift, entire Pro LX drive train w/ custom ACT clutch (I'm the first to succeed this on B6T), Weapon-R, and lots more stuff!
B6T, APEXi Silvia IC, HKS SSQV, Magnacore KV85 Wires, NGK V-Power, Haltech E6K, Accel 300+ Digital Ign w/ coil, Accel 375+ controller, JWMmotorsports turbo manifold & exhaust, custom Garret GT-R series turbo, MAZDASPEED mounts, SRD Bushings, Pacesetter Short Shift, entire Pro LX drive train w/ custom ACT clutch (I'm the first to succeed this on B6T), Weapon-R, and lots more stuff!
Re: December Drag Board
Originally posted by JWMotorsports:
All I have to say Mr. Sick MX-6 is divide it in half, cuz my MX-3 WILL be the 2nd fastest only to Daves car come this summer (my R&D won't be finished untill tracks are long closed). Once my car is done I'm planning on taking the title as FASTEST MX-3 ever! Possibly burring it in the 9's for the 1/4 mile.![]()
![2 Thumbs Up :2thumbsup:](./images/smilies/2thumbsup.gif)
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: December Drag Board
you'll need to change my cars times
Nd4SpdSe 1.476@91.51Mph ze, bully stg 2 clutch, 2.5" exaust, 1sickmx6 driving
That should bump my car in to #5 of the top 5 N/A Mx3's
and theres a few 4cyl mixed in tha you didnt add to the list at the end
8. Cjthor 14.62@99 b6-ze+mods, stripped, slicks, n2o.
12. 94mx3rsr 14.850@96 bp turbo, euro spec fuel mapping
Nd4SpdSe 1.476@91.51Mph ze, bully stg 2 clutch, 2.5" exaust, 1sickmx6 driving
That should bump my car in to #5 of the top 5 N/A Mx3's
and theres a few 4cyl mixed in tha you didnt add to the list at the end
8. Cjthor 14.62@99 b6-ze+mods, stripped, slicks, n2o.
12. 94mx3rsr 14.850@96 bp turbo, euro spec fuel mapping
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: December Drag Board
[quote]Originally posted by JWMotorsports:
All I have to say Mr. Sick MX-6 is divide it in half, cuz my MX-3 WILL be the 2nd fastest only to Daves car come this summer (my R&D won't be finished untill tracks are long closed). Once my car is done I'm planning on taking the title as FASTEST MX-3 ever! Possibly burring it in the 9's for the 1/4 mile.
and what have u run to date sir... nothing...oh
All I have to say Mr. Sick MX-6 is divide it in half, cuz my MX-3 WILL be the 2nd fastest only to Daves car come this summer (my R&D won't be finished untill tracks are long closed). Once my car is done I'm planning on taking the title as FASTEST MX-3 ever! Possibly burring it in the 9's for the 1/4 mile.
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
and what have u run to date sir... nothing...oh
13.023 @ 105 mph
-
- Regular Member
- Posts: 583
- Joined: September 16th, 2002, 2:01 am
- Location: Hartford, CT
Re: December Drag Board
I4 n/a .. 17.7@76 here, cone filter, 2.25" cat-back exhaust
NOW THAT IS FAST!![Crying :crying:](./images/smilies/crying.gif)
NOW THAT IS FAST!
![Crying :crying:](./images/smilies/crying.gif)
Sold my 95 RS "Little Peanut" but she will never be forgotten. ![Sad :(](./images/smilies/icon_sad.gif)
![Sad :(](./images/smilies/icon_sad.gif)
-
- Regular Member
- Posts: 629
- Joined: November 21st, 2002, 2:01 am
- Location: Weyers Cave, VA
- Contact:
Re: December Drag Board
You got a point about track times. But lets put it like this....
call Derrick @ Corksport and ask him if I'm $h*ting you guys, cuz he's sold me the last COUPLE Thousand $$$ worth of equipment that I'm installing as of this moment. As far as the fastest track time, 13.3 @76MPH in the 1/8 mile...that didn't add up did it?
Spun through 1st, POS wouldn't go into 2nd till I hit the brakes to slow back down. Then I spun alllll the way through 2nd, 3rd, and barked 4th on the finish line for that time. I was PISSSED about 2nd gear and didn't feel like paying $10 to run again. The 5.0 Mustang had a 1 sec head start and I STILL almost caught him!
Any way...you can ask Shady on the board, he's seen half the stuff including the new turbo![Pimp :pimp:](./images/smilies/pimp.gif)
call Derrick @ Corksport and ask him if I'm $h*ting you guys, cuz he's sold me the last COUPLE Thousand $$$ worth of equipment that I'm installing as of this moment. As far as the fastest track time, 13.3 @76MPH in the 1/8 mile...that didn't add up did it?
![Wink ;)](./images/smilies/icon_wink.gif)
Any way...you can ask Shady on the board, he's seen half the stuff including the new turbo
![Pimp :pimp:](./images/smilies/pimp.gif)
http://www.cardomain.com/ride/354836
B6T, APEXi Silvia IC, HKS SSQV, Magnacore KV85 Wires, NGK V-Power, Haltech E6K, Accel 300+ Digital Ign w/ coil, Accel 375+ controller, JWMmotorsports turbo manifold & exhaust, custom Garret GT-R series turbo, MAZDASPEED mounts, SRD Bushings, Pacesetter Short Shift, entire Pro LX drive train w/ custom ACT clutch (I'm the first to succeed this on B6T), Weapon-R, and lots more stuff!
B6T, APEXi Silvia IC, HKS SSQV, Magnacore KV85 Wires, NGK V-Power, Haltech E6K, Accel 300+ Digital Ign w/ coil, Accel 375+ controller, JWMmotorsports turbo manifold & exhaust, custom Garret GT-R series turbo, MAZDASPEED mounts, SRD Bushings, Pacesetter Short Shift, entire Pro LX drive train w/ custom ACT clutch (I'm the first to succeed this on B6T), Weapon-R, and lots more stuff!
-
- Regular Member
- Posts: 629
- Joined: November 21st, 2002, 2:01 am
- Location: Weyers Cave, VA
- Contact:
Re: December Drag Board
Another interesting tid bit on my car:
The engine was leaking oil at the head gasket and starting to get a little blow by at the rings![Freak :freak:](./images/smilies/freak.gif)
The engine was leaking oil at the head gasket and starting to get a little blow by at the rings
![Freak :freak:](./images/smilies/freak.gif)
http://www.cardomain.com/ride/354836
B6T, APEXi Silvia IC, HKS SSQV, Magnacore KV85 Wires, NGK V-Power, Haltech E6K, Accel 300+ Digital Ign w/ coil, Accel 375+ controller, JWMmotorsports turbo manifold & exhaust, custom Garret GT-R series turbo, MAZDASPEED mounts, SRD Bushings, Pacesetter Short Shift, entire Pro LX drive train w/ custom ACT clutch (I'm the first to succeed this on B6T), Weapon-R, and lots more stuff!
B6T, APEXi Silvia IC, HKS SSQV, Magnacore KV85 Wires, NGK V-Power, Haltech E6K, Accel 300+ Digital Ign w/ coil, Accel 375+ controller, JWMmotorsports turbo manifold & exhaust, custom Garret GT-R series turbo, MAZDASPEED mounts, SRD Bushings, Pacesetter Short Shift, entire Pro LX drive train w/ custom ACT clutch (I'm the first to succeed this on B6T), Weapon-R, and lots more stuff!
- Shady469
- Supporting Member
- Posts: 722
- Joined: June 7th, 2001, 2:01 am
- Location: Tha "U"!! (Hoo-ville Va.)
- Contact:
Re: December Drag Board
I have seen the turbo... we put the stock one up next to it and i almost cried. i think the in/outlets are like 3x bigger. Its a freak of nature. With all the things jeremy(jwmotorsports) is doing to his car it wont have a choice but to be fast as hell.
oh, and another note about his time: at the same track (1/8th mile) i went (with old b6t set-up) 10.6 @76 with a 3.1 60 ft. There is no traction to be had.
either way, if any of you guys in VA beach or maryland want to meet up early next season at a track you can see first hand what all jeremy and i have done.
maybe we can run em...![2 Thumbs Up :2thumbsup:](./images/smilies/2thumbsup.gif)
oh, and another note about his time: at the same track (1/8th mile) i went (with old b6t set-up) 10.6 @76 with a 3.1 60 ft. There is no traction to be had.
either way, if any of you guys in VA beach or maryland want to meet up early next season at a track you can see first hand what all jeremy and i have done.
maybe we can run em...
![2 Thumbs Up :2thumbsup:](./images/smilies/2thumbsup.gif)
B6T powered MX-3 - sold
Stage 3ish 03 WRX - sold
03 S2000 - current/ for sale
Stage 3ish 03 WRX - sold
03 S2000 - current/ for sale
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: December Drag Board
those two 4cyls are not NAOriginally posted by Nd4SpdSe:
you'll need to change my cars times
Nd4SpdSe 1.476@91.51Mph ze, bully stg 2 clutch, 2.5" exaust, 1sickmx6 driving
That should bump my car in to #5 of the top 5 N/A Mx3's
and theres a few 4cyl mixed in tha you didnt add to the list at the end
8. Cjthor 14.62@99 b6-ze+mods, stripped, slicks, n2o.
12. 94mx3rsr 14.850@96 bp turbo, euro spec fuel mapping
-torp.
I don't own a Mazda.
I don't own a Mazda.