October Drag Board
Re: October Drag Board
I wish there was a track close to where I am. I think the closest one is about 2 hours away. I guess I will head down there once I get my tranny and GTX ECU and harness hooked up to my BPT.
- cjthor
- Forum Moderator
- Posts: 5018
- Joined: November 26th, 2000, 2:01 am
- Location: Portland Oregon
- Contact:
Re: October Drag Board
Well I ran at the track...But I dont think Imma post my times til I get my traction problems figured out....
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
-
- Regular Member
- Posts: 122
- Joined: July 24th, 2001, 2:01 am
- Location: Quebec, Canada
- Contact:
Re: October Drag Board
DUMP AT 2500RPM LIKE ME AND YOU SHOULDNT HAVE ANY PROBLEMS<p>YOU WILL END UP DOING 60FT OF 2.3 -2.4 BUT HEY...
Jean-Michel Basque
STOCK BPT @ 8.5PSI
3 RUNS ON THE 1/4 = 14.85 @ 96
STOCK BPT @ 8.5PSI
3 RUNS ON THE 1/4 = 14.85 @ 96
- cjthor
- Forum Moderator
- Posts: 5018
- Joined: November 26th, 2000, 2:01 am
- Location: Portland Oregon
- Contact:
Re: October Drag Board
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by 94mx3rsr:
DUMP AT 2500RPM LIKE ME AND YOU SHOULDNT HAVE ANY PROBLEMS<p>YOU WILL END UP DOING 60FT OF 2.3 -2.4 BUT HEY...<hr></blockquote>
If I "dump" it I have severe wheel hop and it feels like the front end is coming apart. Not a good thing.
DUMP AT 2500RPM LIKE ME AND YOU SHOULDNT HAVE ANY PROBLEMS<p>YOU WILL END UP DOING 60FT OF 2.3 -2.4 BUT HEY...<hr></blockquote>
If I "dump" it I have severe wheel hop and it feels like the front end is coming apart. Not a good thing.
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
Re: October Drag Board
Get the srd control arm bushings, should help a little with the wheels hop. Slicks maybe?? ![Shrug :shrug:](./images/smilies/shrug.gif)
![Shrug :shrug:](./images/smilies/shrug.gif)
-Mark Lathrop
1992 MX-3 RS-T
B6T with some goodies
"...I told those fudgepackers I liked Michael Bolton's music..."
1992 MX-3 RS-T
B6T with some goodies
"...I told those fudgepackers I liked Michael Bolton's music..."
- cjthor
- Forum Moderator
- Posts: 5018
- Joined: November 26th, 2000, 2:01 am
- Location: Portland Oregon
- Contact:
Re: October Drag Board
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by 992mmx3:
Get the srd control arm bushings, should help a little with the wheels hop. Slicks maybe??![Wink ;)](./images/smilies/icon_wink.gif)
Get the srd control arm bushings, should help a little with the wheels hop. Slicks maybe??
![Wink ;)](./images/smilies/icon_wink.gif)
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: October Drag Board
I was getting alot of hop out of the motor mount flex so inserts would be a good investment too.
13.023 @ 105 mph
Re: October Drag Board
i Finally made it to a 1/4 mile
<p>
15.9513 86.64 MPH<p>Mods are BPD, severe weight reduction, cai, 1 7/8's catback, test pipe, and one bad motor mount that made enough wheelhop to have my teeth chatter...![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
15.9513 86.64 MPH<p>Mods are BPD, severe weight reduction, cai, 1 7/8's catback, test pipe, and one bad motor mount that made enough wheelhop to have my teeth chatter...
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: October Drag Board
15.9513 <p>4th decimal? where did you go ? nasa
<p>thanks for the times , dave is going to be pissed you bumped him
<p>[ July 13, 2003: Message edited by: aaron the hic ]</p>
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
13.023 @ 105 mph
Re: October Drag Board
hehehe yeah he prolly will be.. but it shouldnt take long before someone bumps me either.. It was actually at the san antonio raceeway.. kinda odd but yeah its the exact time ![Wink ;)](./images/smilies/icon_wink.gif)
![Wink ;)](./images/smilies/icon_wink.gif)
-torp.
I don't own a Mazda.
I don't own a Mazda.
Re: October Drag Board
Put the slicks on and ran Friday night...<p>You can now put me up for a 14.067 @ 97.55mph<p>60FT time was 1.921 and I still have a bum second gear, I wasn't even going to race but after going down with arron on Wensday I got the ich back!<p>Later 1SICKMX6!
93 MX6 Black Plate "1SICKMX6"
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: October Drag Board
wed best run<p>r/t .814<p>60' 1.959<p>330' 5.511<p>1/8 8.416@ 84.76mph<p>1000 10.951<p>1/4 13.087@ 105.68mph<p>the car has a twelve i just need to learn how to drive it
13.023 @ 105 mph
Re: October Drag Board
Aaron and Brandon you guys are my heroes!!! Keep it up. One of these days I will make it to a track after I fix about 12 things....
93 Mx-3 GS klze swapped(sold)
96 Integra LS DD
91 Crx Si drag car
2.0L sleeved gsr block, forged internals, skunk2 valvetrain, HP racing intake manifold, Holset H1 turbo, 1000cc injectors, short geared lsd transmission, 3" turboback exhaust. 20 psi![Smile :)](./images/smilies/icon_smile.gif)
96 Integra LS DD
91 Crx Si drag car
2.0L sleeved gsr block, forged internals, skunk2 valvetrain, HP racing intake manifold, Holset H1 turbo, 1000cc injectors, short geared lsd transmission, 3" turboback exhaust. 20 psi
![Smile :)](./images/smilies/icon_smile.gif)
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: October Drag Board
saturday night was good<p>my car was the almost the slowest car there<p>there was a talon running a 12.1 @ 117<p>and a probe gt with a built motor ,a turbo and a laptop to program it running 12.5 @ 112<p>here is my best of the nightwith my cat in cause i couldn't get it out<p>rt- .573<p>60'- 1.899<p>330'- 5.474<p>1/8- 8.395 @ 84.91mph<p>1/4- 13.023 @ 105.13mph<p>brandon was there and ran a 13.8 @ 99 NA
13.023 @ 105 mph
-
- Regular Member
- Posts: 1033
- Joined: October 10th, 2001, 2:01 am
- Location: Philadelphia, PA
- Contact:
Re: October Drag Board
Aaron, do you have any pics of your car? Did you install plexiglass hatch? Where did u get that done?
Check out my ride and leave some feedback please!
http://www.cardomain.com/id/mradio007
http://www.cardomain.com/id/mradio007