October Drag Board
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
October Drag Board
The Track is sticky so get some times
post your times and I'll add them in
1. 1sickmx6 12.74@108 ze n20
2. Tim's mx-3 12.95@109.5 kl03,n2o,275whp
3. aaronthehic 13.023@105 n2o(41/29), ze,ze-ecu,adj. fuel reg., 2.5' exhaust, cat, no alt,no p.steering,plexi hatch k+n, cai, cm4, sht. shift, lwrd, slicks, no seats
4. 93mxrgs 13.03@107 klze,n2o
5. Gabi 14.29@98 ze
6. XxAntwawnxX 14.450@95 ze,probe IM, 2.5' exaust with cat, stripped.
7. smoking mx3 14.47@96 ze, ze-ecu, headers, no cat, lowered
8. Cjthor 14.62@99 b6-ze+mods, stripped, slicks, n2o.
9. thebonestockkid 14.648@ 93 03, not stock.
10. Hex3 14.8@93 ze, nitto 450
11. Lieden 14.82@98 ze, stock
12. 94mx3rsr 14.850@96 bp turbo, euro spec fuel mapping
13. Vlad 15.008@92 kl03, cai, 2.25" catback, lwrd.
14. Kurtze 15.04@? ze_bonestock
15. Wkdmx3gsr 15.1@? ze, catback, nitto555
16. Nd4spdse 15.491@90 ze, bully stg 2 clutch.
17. Nolanspawn 15.680@86.6 93 2L probe
18. Jspec 15.8@? ze-bonestock???
19. Max 15.84@87 k8, k+n, cai, catback, kvr rotors, srd frnt cross member, srd lwr tie bar.
20.Mazadamxstyle 15.92@87 k8, cai, 2.5" catback, 2350lb
<small>[ October 26, 2003, 11:24 PM: Message edited by: aaron the hic ]</small>
post your times and I'll add them in
1. 1sickmx6 12.74@108 ze n20
2. Tim's mx-3 12.95@109.5 kl03,n2o,275whp
3. aaronthehic 13.023@105 n2o(41/29), ze,ze-ecu,adj. fuel reg., 2.5' exhaust, cat, no alt,no p.steering,plexi hatch k+n, cai, cm4, sht. shift, lwrd, slicks, no seats
4. 93mxrgs 13.03@107 klze,n2o
5. Gabi 14.29@98 ze
6. XxAntwawnxX 14.450@95 ze,probe IM, 2.5' exaust with cat, stripped.
7. smoking mx3 14.47@96 ze, ze-ecu, headers, no cat, lowered
8. Cjthor 14.62@99 b6-ze+mods, stripped, slicks, n2o.
9. thebonestockkid 14.648@ 93 03, not stock.
10. Hex3 14.8@93 ze, nitto 450
11. Lieden 14.82@98 ze, stock
12. 94mx3rsr 14.850@96 bp turbo, euro spec fuel mapping
13. Vlad 15.008@92 kl03, cai, 2.25" catback, lwrd.
14. Kurtze 15.04@? ze_bonestock
15. Wkdmx3gsr 15.1@? ze, catback, nitto555
16. Nd4spdse 15.491@90 ze, bully stg 2 clutch.
17. Nolanspawn 15.680@86.6 93 2L probe
18. Jspec 15.8@? ze-bonestock???
19. Max 15.84@87 k8, k+n, cai, catback, kvr rotors, srd frnt cross member, srd lwr tie bar.
20.Mazadamxstyle 15.92@87 k8, cai, 2.5" catback, 2350lb
<small>[ October 26, 2003, 11:24 PM: Message edited by: aaron the hic ]</small>
13.023 @ 105 mph
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: October Drag Board
13.023 @ 105 mph
-
- Regular Member
- Posts: 49
- Joined: April 9th, 2003, 2:01 am
- Location: casper, wy elevation 5200 above sea level
Re: October Drag Board
15.6 1.8 v6 short shifter and performance muffler
-
- Senior Member
- Posts: 2516
- Joined: November 7th, 2000, 2:01 am
- Location: Gainesville, FL USA
- Contact:
Re: October Drag Board
I would like to note that only legitimate track times count. No GTECH guestimates.
David Coleman
I used to know alot about MX-3's, but not so much anymore. Oh well.
I used to know alot about MX-3's, but not so much anymore. Oh well.
Re: October Drag Board
so i cant slip in with my 15.9 from my gtech rats.. wouldnt even of tried the things are pieces of.. well n./m
-torp.
I don't own a Mazda.
I don't own a Mazda.
-
- Regular Member
- Posts: 711
- Joined: August 13th, 2001, 2:01 am
- Location: Val-d'Or, Canada
- Contact:
Re: October Drag Board
7. Cjthor 14.62@99 b6-ze+mods, stripped, slicks, n2o.<p>Yeah! a B engine in the rank! <p>25th of May, I'll be running too!!
Manach
Ex Mx'er with a Mx-3 1993..
Still in the Mazda Familly with :
-Mazda Rx-7 1987 GXL (Not running, one housing does not compress)
-Mazda Protege MazdaSpeed 2003.5 Titanium!
Still got 3 Engines!
- B6-ZE : Turbo Festiva project (Waiting donor car)
- BP-DE : Trader for a B6-ZE 1994 for parts upgrade in the Festiva project
- K8 : For sell. Pm me for info!
Once you go turbo, you can never go back!
Ex Mx'er with a Mx-3 1993..
Still in the Mazda Familly with :
-Mazda Rx-7 1987 GXL (Not running, one housing does not compress)
-Mazda Protege MazdaSpeed 2003.5 Titanium!
Still got 3 Engines!
- B6-ZE : Turbo Festiva project (Waiting donor car)
- BP-DE : Trader for a B6-ZE 1994 for parts upgrade in the Festiva project
- K8 : For sell. Pm me for info!
Once you go turbo, you can never go back!
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: October Drag Board
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by slow one:
15.6 1.8 v6 short shifter and performance muffler<hr></blockquote><p>yeah I would have to call time slip on that one. got a slip I'll gladly add it in <p>
15.6 1.8 v6 short shifter and performance muffler<hr></blockquote><p>yeah I would have to call time slip on that one. got a slip I'll gladly add it in <p>
13.023 @ 105 mph
-
- Regular Member
- Posts: 49
- Joined: April 9th, 2003, 2:01 am
- Location: casper, wy elevation 5200 above sea level
Re: October Drag Board
ok im not running at a track because i dont have one to run at, but i had mapped out a quarter mile excaclty and i ran about ten times while i was timed bye two people. i was getting 15.6 and 15.7 just about every time i ran im sorry i cant prove it but it doesnt bother me if you dont believe. And yes gtechs are crap because i ran a gtech in my friends car and he was running 18's and he actualy whent to a track and ran 16.9 but his was a civic, and i can beat him bye a good car length. I dont care if im not posted in the top 20 im just here to have fun and learn more about my car.
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: October Drag Board
there's got to be a track somewhere down there. It's america the land of the muscle car. the problem is that "one mississippi" is the difference between a 14.9 and a 16.0 and that is a big difference at trhe strip. I would like to have another 15.6 up there so just find a track and do it .<p>hey Antwawn! what your mph for the 14.450.+ Brandon at PI has a ze intake for sale if you want it .<p>[ April 29, 2003: Message edited by: aaron the hic ]</p>
13.023 @ 105 mph
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: October Drag Board
It's a straight neck. sorry , that is what I run with modded motor mounts to tilt the motor forward an inch.
13.023 @ 105 mph
-
- Regular Member
- Posts: 97
- Joined: October 24th, 2001, 2:01 am
- Location: London ont.Canada
- Contact:
Re: October Drag Board
14.29@98 ze, it was last year. This friday I will run for the first time with a turbo on it .
See you in my rear wiew!!
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: October Drag Board
what you got for turbo setup on the ZE? HOw many PSI?
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project