mx-3 roll cage blue prints???

mx3freak139 · Post by **mx3freak139** » October 29th, 2003, 12:53 pm

im trying to find blue prints for a roll cage for my 1993 mx-3 so i can build one some one give me a link to a page or something

cjthor · Post by **cjthor** » October 29th, 2003, 12:54 pm

Good luck man.. There is a company that makes them called autopower.

boostedmx · Post by **boostedmx** » October 30th, 2003, 6:48 pm

very easy to do..

1 - get yourself a tube bender

2 - get yourself a tube notcher

3 - get yourself a welder

4 - get about 40 to 60 ft of 1 5/8 thick wall tubing

5 - some angle iron and some plate steel

or skip all of that and have someone build it for you. if you still want to attempt it, its a build as you go process. ive built and helped build numerous cages for my race cars and other peoples also. alot of it depends on how tight to the body you want it and how hidden it has to be. its not hard but you may want to get extra pipe because you WILL screw up. a helpful tool is a 8 ft piece of thin rod that can be bent into the shape you need and transfered to the bender to copy it. i would definately draw it out and get yourself an idea before you start. good luck

DVH · Post by **DVH** » October 30th, 2003, 10:49 pm

<small>[ October 31, 2003, 12:09 AM: Message edited by: DVH ]</small>

cjthor · Post by **cjthor** » October 31st, 2003, 7:01 pm

Originally posted by DVH:

Whose car?

Spydie · Post by **Spydie** » October 31st, 2003, 11:03 pm

Originally posted by cjthor:

Originally posted by DVH:
[qb]
<img src="http://images.cardomain.com/member_imag ... 1_full.jpg" alt=" - " />

Actually I'm glad I saw this pic. I've been struggling with my sub boxes sliding around.....I used a couple bungee cords to hold them in place. The brackets over the strut bar is a great idea. Once my diamond plate trunk falls into place it'll have slots for my subs to be mounted...but those brackets are a great temp. fix.

<small>[ October 31, 2003, 10:04 PM: Message edited by: Darren Hyderman ]</small>

DVH · Post by **DVH** » November 2nd, 2003, 7:35 pm

Originally posted by cjthor:

Whose car?

no idea??? some guy on car domain and lives in toronto....never seen it before, but prety nice

mx3freak139 · Post by **mx3freak139** » November 5th, 2003, 1:40 pm

I LIKE THAT SILVER CARS ROLL CAGE DESIGN BUT IS THERE SOME MORE PICS OF IT SOME MORE INTERIOR DESIGNS

DVH · Post by **DVH** » November 5th, 2003, 2:27 pm

Originally posted by mx3freak139:
I LIKE THAT SILVER CARS ROLL CAGE DESIGN BUT IS THERE SOME MORE PICS OF IT SOME MORE INTERIOR DESIGNS

Thats all i could find bro, sorry

cjthor · Post by **cjthor** » November 7th, 2003, 2:47 pm

Originally posted by DVH:

Originally posted by mx3freak139:
I LIKE THAT SILVER CARS ROLL CAGE DESIGN BUT IS THERE SOME MORE PICS OF IT SOME MORE INTERIOR DESIGNS
Thats all i could find bro, sorry

U got a link to his cardomain site?

DVH · Post by **DVH** » November 7th, 2003, 3:42 pm

Here's his car domain site

Steeb · Post by **Steeb** » November 12th, 2003, 10:30 pm

http://www.ioportracing.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=IPRS&Category_Code=AP021

MX-3.com

mx-3 roll cage blue prints???

mx-3 roll cage blue prints???

Re: mx-3 roll cage blue prints???

Re: mx-3 roll cage blue prints???

Re: mx-3 roll cage blue prints???

Re: mx-3 roll cage blue prints???

Re: mx-3 roll cage blue prints???

Re: mx-3 roll cage blue prints???

Re: mx-3 roll cage blue prints???

Re: mx-3 roll cage blue prints???

Re: mx-3 roll cage blue prints???

Re: mx-3 roll cage blue prints???

Re: mx-3 roll cage blue prints???