Nitrous On The Mx-3

A Forum For All Forced Induction Systems Topics Such As Turbos, Superchargers and Nitrous Oxide.
Post Reply
SelurYrator
Junior Member
Posts: 2
Joined: June 30th, 2004, 2:01 am
Location: Miami, FL

Nitrous On The Mx-3

Post by SelurYrator »

We recently purchased an mx-3 as a project car/weekend driver. Im new to the forum and have have performed all the basic power upgrades and reliability/maintenance mods. My question is, what are the necesarry components/mods to install a Nitrous kit on the V6 mx3. Fuel pump, safc, what is it that I need exactly to run a decent shot size, probably wet. Last, what size shot of Nitrous is safe for the mx3 engine on stock ports?
koreanmx-er
Regular Member
Posts: 369
Joined: September 16th, 2002, 2:01 am
Location: minnesota

Re: Nitrous On The Mx-3

Post by koreanmx-er »

i dont think your gonna need a safc just for nitrous thats more of a turbo f/i device, just updating your fuel pump to a higher flowing one should do the trick to make sure you dont have too much nitrous too little fuel (boom) plus if you were going the safc route its a biiyitch to wire in or so im told :shrug: oh and a 50shot is about whats going to be the safest yet most powerful shot your gonna wanna run

<small>[ June 30, 2004, 08:42 PM: Message edited by: koreanmx-er ]</small>
sold the mx-3 , bought 04 gtp comp g , from the smallest v6 to one of the biggest 3800 s/c FTW
SelurYrator
Junior Member
Posts: 2
Joined: June 30th, 2004, 2:01 am
Location: Miami, FL

Re: Nitrous On The Mx-3

Post by SelurYrator »

So a 50 shot of wet nitrous and a walbro 255lph High Pressure fuel pump should be enough? Sounds good, thanks for your reply man.
mdavis
Regular Member
Posts: 540
Joined: May 23rd, 2003, 2:01 am
Location: Placerville, California
Contact:

Re: Nitrous On The Mx-3

Post by mdavis »

Hmmm I have a Nitrous Express wet kit. I use a 35 shot all the time on the street with wtock fuel pump, of course, and normal plugs. A 50 shot is ok with a stock fuel pump, but you probably will need 1 or 2 deg cooler spark plugs to prevent detonation. I don't know if you can do a 75 on a stock fuel pump... it might be ok and just run a little lean, or not... I would just upgrade to a walbo 255 like you said if i was going to run a 75.. also you will need -2 or -3 deg plugs fot a 75 but INTERNALS CAN HANDLE IT JUST FINE. I was going to try a 50 in a few days but now i'll probably never know waht it's like.. i fuXzored my tranny racing the other night... 3rd gear is useless... that's no good... I see no reason to fill my bottle for $40 to run 1st and 2nd gear haha. I'm jsut going to wait a month until those turbo kits are done and and stick an mx-6 tranny in when i turbo. w00t
Image
GS-R SE
Fixin's
User avatar
Franko
Supporting Member
Posts: 1443
Joined: September 2nd, 2002, 2:01 am
Location: Newfoundland, Canada
Contact:

Re: Nitrous On The Mx-3

Post by Franko »

I hear the ZEX kit is the best, it has its own computer that monitors everything. Also a wet kit would be the safest I would say, it supplies the extra gas required instead of your stock injectors, there is a less chance of running lean that way. I knew someone who put nos in their saturn, he forgot to put the nozzle in to restrict the amount of nitrous and when he tested it, it blew the hood off the car and absloutely obliterated the engine. There was just 2 very black skidmarks and 1 very wrote off saturn.. Be Careful..

<small>[ July 02, 2004, 09:46 AM: Message edited by: Franko ]</small>
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
Image
User avatar
JWMX3
Senior Member
Posts: 2060
Joined: March 23rd, 2004, 2:01 am
Location: Grassie, Ontario
Contact:

Re: Nitrous On The Mx-3

Post by JWMX3 »

put nos in their saturn, he forgot to put the nozzle in to restrict the amount of nitrous and when he tested it, it blew the hood off the car and absloutely obliterated the engine. There was just 2 very black skidmarks and 1 very wrote off saturn..
HHAHAHAHAHAAH..........sorry but its only funny cus its a Saturn :D
I wish I was there to see that


BTW I also hear lots of good on the ZEX wet kits, was thinkin of gettin one myself w/ a walbro fuel pump ;)
Image
94' Mx3 GS 0-60 in 7.53s [5 spd conversion / Rebuilt 2.5 KL]
mx3man83
Regular Member
Posts: 1921
Joined: August 25th, 2002, 2:01 am
Location: tucson, az

Re: Nitrous On The Mx-3

Post by mx3man83 »

That is a very common mistake. Many people get all excited about squeezin', and in the process of the install they forget about the correct nozzle and BOOOM.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
Damious
Regular Member
Posts: 77
Joined: June 7th, 2003, 2:01 am
Location: Toronto Canada

Re: Nitrous On The Mx-3

Post by Damious »

just thought i would mention i was cruising around on probetalk in the Nitrous section... a guy blew his engine on a 75 hp shot using the stock fuel pump...

im not saying it'll happen to u... im just saying make sure it doesn't ;)

<small>[ July 05, 2004, 11:39 PM: Message edited by: Trancelucent ]</small>
-Damian

***if u know of/have a mx-3 GS with a blown engine and live around me... let me know ;) ***
mx3man83
Regular Member
Posts: 1921
Joined: August 25th, 2002, 2:01 am
Location: tucson, az

Re: Nitrous On The Mx-3

Post by mx3man83 »

The guys name was smithule. Only fools expect not to blow a stock engine on a 75 shot running the stock fuel pump.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
mdavis
Regular Member
Posts: 540
Joined: May 23rd, 2003, 2:01 am
Location: Placerville, California
Contact:

Re: Nitrous On The Mx-3

Post by mdavis »

Originally posted by mx3man83:
That is a very common mistake. Many people get all excited about squeezin', and in the process of the install they forget about the correct nozzle and BOOOM.
Hahah, are you serious? Maybe it's just me but that sounds like a ---damn stupid mistake..
Image
GS-R SE
Fixin's
mx3man83
Regular Member
Posts: 1921
Joined: August 25th, 2002, 2:01 am
Location: tucson, az

Re: Nitrous On The Mx-3

Post by mx3man83 »

Yup, people just get all excited and forget to put the jets in. Happened to my friends civic with a 20k engine. He told his employee to drive it somewhere but told him not to squeeze, but didn't tell him why. The dude squeezed, boom 20k out of the hood.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
Post Reply

Return to “Forced Induction”