Update on RacingMazda kit
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: Update on RacingMazda kit
Estimated cost is $2500 USD, similar setups for the MX6 go for $2900USD.<P>Nothing is firm yet.
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
-
- Regular Member
- Posts: 40
- Joined: January 2nd, 2002, 2:01 am
- Location: Canyon Country, CA
- Contact:
Re: Update on RacingMazda kit
Just incase anyone was curious....<BR> <A HREF="http://pub51.ezboard.com/funitedescorto ... =353.topic" TARGET=_blank>http://pub51.ezboard.com/funitedescorto ... 3.topic</A> <P>There are other options out there aside from Mitsubishi turbos.
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: Update on RacingMazda kit
Braden, that is fine for Ashley and the others running the BP, but do you have anything for the B6?
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: Update on RacingMazda kit
Ric emailed me tonight, he just finished up on the MX6 I4 kit. He is working on the V6 one next, not sure about compatibility for the MX3 v6 but I imagine it will be pretty close if not a perfect match.<P>Here is a link to some of the pics for the current offering for the MX6:<BR><A HREF="http://www.racingmazda.com/kits/mx6/s-93.htm" TARGET=_blank>RacingMazda MX6 turbo</A>
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
Re: Update on RacingMazda kit
any update on the V6 kit?
-
- Regular Member
- Posts: 583
- Joined: September 16th, 2002, 2:01 am
- Location: Hartford, CT
Re: Update on RacingMazda kit
1 year old post
Sold my 95 RS "Little Peanut" but she will never be forgotten.
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: Update on RacingMazda kit
Why don't you email him?
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: Update on RacingMazda kit
i recently emailed ric a few times last week and he's told me he will end up not doing this kit for us sohc owners.. mostly because of not enough interest and too many people insulted his kit. he has informed me that he WILL do custom work though and i am getting my manifold from him... just a few more bucks to save and he hasn't gotten back to me on the pricing.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
Re: Update on RacingMazda kit
Well let's try to get him to make a kit for the k series engines. That way his sales wont be limited strictly to mx-3's and 323's. I would definitely buy a turbo kit as long as it was under 3 grand.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
My Cardomain site
-
- Regular Member
- Posts: 1333
- Joined: December 11th, 2000, 2:01 am
- Location: Saskatoon, SK, Canada
Re: Update on RacingMazda kit
The problem is that there are only a few who want to buy a kit and are willing to pay what it is worth. I don't know why there are so many dumbasses on this board who ridicule the guy who is going 10.98 or better when I don't see them going faster than 14.xx. Pay the guy some respect, he has certainly paid his dues. And you wonder why people/companies don't want to make stuff for our cars. I don't blame him in the least and I highly doubt he will want to make one for the V6 after the way he was treated here.
Chris Malden
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
MX-3 RSR
chris.malden@sasktel.net
chris.malden@sasktel.sk.ca
B6T Swap Info |IHI Turbo Sources
Re: Update on RacingMazda kit
Understandable, but you have to realize the internet is the internet man. Full of 16 year old kids that just shoot their mouth off. I've done it myself a few times, but eventually you realize there is no point to being a pain in someone's *** If a kit was made for the k series engines think of the marketing opportunities. Let's see here, for starters, a basic kit would work for mx-3's, Probe's, mx-6's, Millenias, and 626's. Even if he made the kit and marketed it to racing shops around the country(instead of using the internet) he would still have a good response. Oh well, custom turbo is, was, and probaly always will be the way to go for us.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
My Cardomain site
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: Update on RacingMazda kit
exactly my words chris. exactly my words.Originally posted by maldo:
And you wonder why people/companies don't want to make stuff for our cars.
at LEAST he is willing to make us custom manifolds on special order by contacting him. now that says a LOT about his personality after the way he was treated.
mx3man you're right. custom is pretty much the only route we can take right now.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: Update on RacingMazda kit
that's true, but there aren't enough people around the world who fix up mx-3s and marketing his kit around the country in different shops and magazine articles would cost too much money... most mx-3 tuners can be found on this bulletin board which would be a good start for some feedback from his kit.Originally posted by mx3man83:
Even if he made the kit and marketed it to racing shops around the country(instead of using the internet) he would still have a good response.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: Update on RacingMazda kit
why does everyone gotta attack the man, he is doing stuff no one else is willing to do and he gets **** for it, kinda makes me wanna get rid of my mazda and get a honduh, at least i wouldnt have to go onto a board thats supposed to help you and stuff and avoid this kinda **** where people run off groups that are willing to MAKE stuff that we dont have access to unless you go custom............
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Re: Update on RacingMazda kit
That's the thing..a kit for the k series engines could be developed that fits many different cars, such as the ones i listed above. If not a whole kit, then at least a manifold. That is something I would like to see.Originally posted by marshmallow15:
that's true, but there aren't enough people around the world who fix up mx-3s and marketing his kit around the country in different shops and magazine articles would cost too much money... most mx-3 tuners can be found on this bulletin board which would be a good start for some feedback from his kit.Originally posted by mx3man83:
Even if he made the kit and marketed it to racing shops around the country(instead of using the internet) he would still have a good response.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
My Cardomain site