Installed Prices
-
advantiracing
- Regular Member
- Posts: 111
- Joined: October 28th, 2003, 2:01 am
- Location: richmond hill
- Contact:
Installed Prices
Just asking for some prices on installed kl-ze and de's... thanks ( engine and labour ) PEACE
-
seneca
- Regular Member
- Posts: 554
- Joined: January 3rd, 2004, 2:01 am
- Location: Ottawa, Ontario
- Contact:
Re: Installed Prices
Hey you don't happen to be Craig? Are you?
Well anyways my buddies own a performance shop and and pick J-spec engines up pretty cheap. The reason....they do not mark up the prices for personal gain. Last time that I checked they had put a KL-ZE in a red mx-3 sleeper a few months ago. For around $1000 bucks I believe. Don't quote me, but is was SOOOOO much cheaper than anywhere found on the net.
Tyson
Well anyways my buddies own a performance shop and and pick J-spec engines up pretty cheap. The reason....they do not mark up the prices for personal gain. Last time that I checked they had put a KL-ZE in a red mx-3 sleeper a few months ago. For around $1000 bucks I believe. Don't quote me, but is was SOOOOO much cheaper than anywhere found on the net.
Tyson
My Car Domain Page:
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
-
advantiracing
- Regular Member
- Posts: 111
- Joined: October 28th, 2003, 2:01 am
- Location: richmond hill
- Contact:
Re: Installed Prices
yeah, im the man..
im getting my mx-3 kitted and painted there next week.. maybe in the summer a swap...
thanks! TTYL
im getting my mx-3 kitted and painted there next week.. maybe in the summer a swap...
thanks! TTYL
-
Tyler17rose
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: Installed Prices
Seneca, what shop are you talkin about? I'd be interested in a KLZE swap all done in and out for 1000 bucks! Let me know, cause i'm in ottawa.
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
-
seneca
- Regular Member
- Posts: 554
- Joined: January 3rd, 2004, 2:01 am
- Location: Ottawa, Ontario
- Contact:
Re: Installed Prices
Hey guys.
ALrighty let me clarify..around $1000. I was shooting from the hip, and was quoteing a rough price that he gave to me, but I assume that in actuality it should not be too far off (concidering corksport is offering an engine for over $2000 after exchange and shipping) If you guys want I'll ask Graham and check on and exact price. Hows that? I'll have it posted hopefully by tomorrow.
Regards,
Tyson
ALrighty let me clarify..around $1000. I was shooting from the hip, and was quoteing a rough price that he gave to me, but I assume that in actuality it should not be too far off (concidering corksport is offering an engine for over $2000 after exchange and shipping) If you guys want I'll ask Graham and check on and exact price. Hows that? I'll have it posted hopefully by tomorrow.
Regards,
Tyson
My Car Domain Page:
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
-
seneca
- Regular Member
- Posts: 554
- Joined: January 3rd, 2004, 2:01 am
- Location: Ottawa, Ontario
- Contact:
Re: Installed Prices
Ok Guys here's your canadian prices for KL-ZE engines. THey can be purchaced by my friends shop for $1300! Thats for the engine, brought to their shop. ANd they usually charge around $500 for a complete install. Sorry I took so ling to get an answer...they're very busy ppl! The shop is located in Pembroke, Ont.
IM me with questions if you have any.
Tyson
IM me with questions if you have any.
Tyson
My Car Domain Page:
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
-
FlyingMXer
- Regular Member
- Posts: 84
- Joined: December 12th, 2003, 2:01 am
- Location: M'boro, TN
- Contact:
Re: Installed Prices
1800 for a ze swap?! 
Wish we could get that kind of price range for a BPT or BP.
Wish we could get that kind of price range for a BPT or BP.Later, D
92 4-banger (totaled unfortunately. Current ride is 2001 Mustang GT)
92 4-banger (totaled unfortunately. Current ride is 2001 Mustang GT)
-
seneca
- Regular Member
- Posts: 554
- Joined: January 3rd, 2004, 2:01 am
- Location: Ottawa, Ontario
- Contact:
Re: Installed Prices
Hey well I'm sure that he could get those shipped in as well! WHat kind of car do they come out of??? I mean it's not that I don't know what a BPT is...but I do not know it's origins!
Plus we're alll the way up north!
Tyson
Plus we're alll the way up north!
Tyson
My Car Domain Page:
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
-
mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: Installed Prices
$1000 for engine install, what kind of momma's boys are you dudes???? ~$350 installed from this guy i know around here, but even that is too expensive for me so ill do it myself
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
-
FlyingMXer
- Regular Member
- Posts: 84
- Joined: December 12th, 2003, 2:01 am
- Location: M'boro, TN
- Contact:
Re: Installed Prices
The BP came out of these cars: 1991-1995 Escort GT, 1990-94 Protégé LX(us) GT(Canada) and 1990-1994 Mercury Tracer LTS. I believe the BPTs come out of 323 gt's. 
Later, D
Later, D
Later, D
92 4-banger (totaled unfortunately. Current ride is 2001 Mustang GT)
92 4-banger (totaled unfortunately. Current ride is 2001 Mustang GT)
-
MikeUK
- Forum Moderator
- Posts: 408
- Joined: October 10th, 2003, 2:01 am
- Location: Manchester, England
- Contact:
Re: Installed Prices
Im gona be getting a KLZE, but to get one of those things its gonna cost about £1000 