Need some ideas for Projector headlights.
-
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: Need some ideas for Projector headlights.
I hope ours look as sweet as those do!
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
Re: Need some ideas for Projector headlights.
I can not see the pictue :frown:
-
- Regular Member
- Posts: 416
- Joined: June 25th, 2001, 2:01 am
- Location: King George, Va
- Contact:
Re: Need some ideas for Projector headlights.
"Car Model" doesn't let you link to the pictures. That's why he (and I) couldn't see them.
1995 Blaze Red RS 5sp. Manual, Pacesetter Exhaust, Custom CAI, 17" ADR Rims, Kumho Tires, Altezzas, GS Style Spoiler and Mud Guards, Neoprene Seat Covers, Aluminum Foot Pedals, Leather Shift Knob, Remote Starter, Blaupunkt Stereo and 5-disc changer, Pioneer Speakers, Amp, and Sub<p>http://www.cardomain.com/id/lendogg<p>http://www.msu.edu/~leonar40/Car.html<p>
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: Need some ideas for Projector headlights.
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Len-Dogg:
"Car Model" doesn't let you link to the pictures. That's why he (and I) couldn't see them.<hr></blockquote><p>Copy/paste the link in your browser.
"Car Model" doesn't let you link to the pictures. That's why he (and I) couldn't see them.<hr></blockquote><p>Copy/paste the link in your browser.
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: Need some ideas for Projector headlights.
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Custommx3:
[QB]Please post ONLY IDEAS AND PICTURES. Do not post un needed comments, if so, they will be deleted.<hr></blockquote><p>just a quick reminder.. Im going to weed out this thread as much as possible. I need feedback not arguing. Please do not post unrelated comments in this thread.<p>[ July 03, 2003: Message edited by: Custommx3 ]</p>
[QB]Please post ONLY IDEAS AND PICTURES. Do not post un needed comments, if so, they will be deleted.<hr></blockquote><p>just a quick reminder.. Im going to weed out this thread as much as possible. I need feedback not arguing. Please do not post unrelated comments in this thread.<p>[ July 03, 2003: Message edited by: Custommx3 ]</p>
Re: Need some ideas for Projector headlights.
not bad at all... but is the signal going to be that gigantic?
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: Need some ideas for Projector headlights.
Im not making them like that, no signal, just dual projectors. Gonna be a little simple. If they are too elaborate, thats mroe time, and more expensive.
-
- Regular Member
- Posts: 242
- Joined: November 1st, 2002, 2:01 am
- Location: Charlotte Mich.
- Contact:
Re: Need some ideas for Projector headlights.
hey barry, there is going to be a group buy on them right? do u have a projected completion date yet?
<img src="http://www.inuyasya.com/A-HASIRU-S.gif" alt=" - " />
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: Need some ideas for Projector headlights.
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Nate Dog:
hey barry, there is going to be a group buy on them right? do u have a projected completion date yet?<hr></blockquote>
No ETA as of yet, I have to start this and work on it when I can, and I havent had alot of time recently, but starting next week I should. <p>As far as group buys, thats all depending on the guy helping me. These are going to be a pain to produce and may be a limited production depending on time involved. Be aware if I setup a group buy then selling them as a group will take longer to produce. 1 offs may be easier and I may setup a list and sell starting @ #1. Dont start posting saying u want one until I have a prototype ready, When I do I should start collecting money, whoever gets me the money first will be #1. (some others who have helped mein the past are already going to have 1st priority, its only fair)<p>[ July 03, 2003: Message edited by: Custommx3 ]</p>
hey barry, there is going to be a group buy on them right? do u have a projected completion date yet?<hr></blockquote>
No ETA as of yet, I have to start this and work on it when I can, and I havent had alot of time recently, but starting next week I should. <p>As far as group buys, thats all depending on the guy helping me. These are going to be a pain to produce and may be a limited production depending on time involved. Be aware if I setup a group buy then selling them as a group will take longer to produce. 1 offs may be easier and I may setup a list and sell starting @ #1. Dont start posting saying u want one until I have a prototype ready, When I do I should start collecting money, whoever gets me the money first will be #1. (some others who have helped mein the past are already going to have 1st priority, its only fair)<p>[ July 03, 2003: Message edited by: Custommx3 ]</p>
-
- Regular Member
- Posts: 1033
- Joined: October 10th, 2001, 2:01 am
- Location: Philadelphia, PA
- Contact:
Re: Need some ideas for Projector headlights.
Barry, what is the price range you are looking at for these projector lights?
Check out my ride and leave some feedback please!
http://www.cardomain.com/id/mradio007
http://www.cardomain.com/id/mradio007
Re: Need some ideas for Projector headlights.
Vlad please at least skim all the posts. I know there is a lot, but if you just read barry's he has mentioned what price he is shooting to make the housing for, and what price we can probably get the hella's for.
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: Need some ideas for Projector headlights.
bump...i don't want this thread to go off the 1st page in here
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
-
- Regular Member
- Posts: 711
- Joined: August 13th, 2001, 2:01 am
- Location: Val-d'Or, Canada
- Contact:
Re: Need some ideas for Projector headlights.
Oh jezz..<p>Me that was thinking that it would be made way before I repost on that board.. I have been trick muehehe
Manach
Ex Mx'er with a Mx-3 1993..
Still in the Mazda Familly with :
-Mazda Rx-7 1987 GXL (Not running, one housing does not compress)
-Mazda Protege MazdaSpeed 2003.5 Titanium!
Still got 3 Engines!
- B6-ZE : Turbo Festiva project (Waiting donor car)
- BP-DE : Trader for a B6-ZE 1994 for parts upgrade in the Festiva project
- K8 : For sell. Pm me for info!
Once you go turbo, you can never go back!
Ex Mx'er with a Mx-3 1993..
Still in the Mazda Familly with :
-Mazda Rx-7 1987 GXL (Not running, one housing does not compress)
-Mazda Protege MazdaSpeed 2003.5 Titanium!
Still got 3 Engines!
- B6-ZE : Turbo Festiva project (Waiting donor car)
- BP-DE : Trader for a B6-ZE 1994 for parts upgrade in the Festiva project
- K8 : For sell. Pm me for info!
Once you go turbo, you can never go back!
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: Need some ideas for Projector headlights.
we can probably sell them worldwide if people want to pay the shipping.<p>The headlighs are being delayed (sorry but they are comming) my sponsor has a few custom cars hes building thats taking up all his time. Im trying to help him finish them so we can get on the ball. A few of my buddies decided to get into a fender bender into each other (one being my buddy driving my GS!!) so those are at the shop being repaired too. Once again, sorry for the delay, just a lil too busy right now. Once we get the mold finished, I can pump them out one after another. BE sware thir will have to be a waiting list unfortunatley, I cant produce a 1000 in 1 day But all those details will be worked out.